Locating Replacement Bearing Kit for 2003 Jayco Qwest Camper

Question:

I need to order Replacement bearing kit for Ez line bearings for the above camper. GAWR IS 2000 lb

asked by: Mike

Expert Reply:

In order to find the right replacement bearing kit for your Jayco Qwest 8U Pop-Up Camper you will need to pull one of the hubs. Once you have the hub off the trailer remove the inner and outer bearings and check for a number that should be stamped right on the inside of them.

If you cannot read the numbers, then you can also take a few measurements along the spindle where the bearings sit with a digital caliper that can measure to the nearest thousandth of an inch. I have attached an image that shows where these measurements should be taken.

If you can tell me the numbers, you find or the measurements you take I will be happy to recommend the correct bearing kit. Unfortunately trailer manufacturers don't do a good job of making information like this available so I'm not able to track down the right bearings without this info.

expert reply by: Chris R