Curt v. etrailer Trailer Hitch Receiver For 2023 Kia Carnival

Question

Question:

What are the differences, if any, between the Curt and etrailer trailer hitches that fit a 2023 Kia Carnival? Thanks!

asked by: Robert D

0

Expert Reply:

There is just a single difference between the Curt and etrailer trailer hitches that fit your 2023 Kia Carnival, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which you prefer. The hitches that fit your '23 Carnival are the following part numbers:

- Curt Trailer Hitch Receiver # C67ER

- etrailer Trailer Hitch Receiver # e36KR

The matte black finish is nice as it hides the inevitable dings, scuffs and scratches better than the glossy finish, but if you don't feel strongly either way about the finish, then just go with the best price. Otherwise, these are the exact same hitch with the same 4,000 lb towing/600 lb tongue weight capacities and simple bolt-on installation.

expert reply by: Kyle S

0

Answer 1

Exactly! Both hitches are very similar in design and construction. That is usually what happens when hitches are custom-fit for your vehicle. The main difference is the finish. I personally prefer the matte finish that #e98839 has. We have them on…

view full answer...

Answer 2

There are only some minor differences between the two trailer hitch receivers for your 2022 Kia Carnival, which are the following part numbers: - Draw-Tite Max-Frame Trailer Hitch Receiver #DT34GR - Curt Trailer Hitch Receiver #C67ER One of those…

view full answer...

Answer 3

Yes, we do have a hitch for your 2023 Kia Carnival. - etrailer Trailer Hitch Receiver #e36KR The etrailer Trailer Hitch Receiver #e36KR is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver to carry…

view full answer...

Answer 4

First you will need the etrailer Trailer Hitch Receiver #e36KR for your 2023 Kia Carnival. This will give you a 2" receiver which will allow you to use the Curt Towing Starter Kit #C45554 which includes the ball mount, 2" ball, pin and clip…

view full answer...

Answer 5

To add a 2" hitch to your 2023 Kia Carnival, I recommend the etrailer Hitch item #e36KR. This hitch is custom fit and bolts directly to your Kia with included hardware. The etrailer Hitch item #e36KR is a class III hitch, with a 2"…

view full answer...

Answer 6

No, the warranty will not be affected whatsoever on your 2022 Kia Carnival by installing the Curt trailer hitch that fits, which is the following part number: - Curt Trailer Hitch Receiver #C67ER The reason why is because you are protected by what is…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...