Curt Class III Trailer Hitch Installation - 2022 Kia Carnival Video

We have the grease seal you are looking for. Our part number #GS-2250DL is the same as the Dexter 010-054-00 that you have. The inner diameter of this seal is 2.25 and the outer is 3.376 inches.

It sounds like you have the older hub 22834 that is no longer in production that takes the outer bearing of part #1779 and inner bearing of part #2788. I was not able to find any other bearings that measure .093" inner diameter besides 1779…

To add a 2" hitch to your 2023 Kia Carnival, I recommend the etrailer Hitch item #e36KR. This hitch is custom fit and bolts directly to your Kia with included hardware. The etrailer Hitch item #e36KR is a class III hitch, with a 2"…

All you need for attaching a brake controller to your 2022 Hyundai Palisade is the receiving-end setup. For that setup, you need to have a 4-way and a 7-way wiring harness in order to use a brake controller. If you do not have the 4-way installed…

Based on my research a hub with a part number 46845 is a hub with a 5 on 4-1/2" bolt pattern and uses inner bearing #L68149 and outer bearing #L44649 like what the bearing kit part #BK2-100 that you referenced provides. The axle should have…

I have attached for you below the installation instructions of the Curt Trailer Hitch Receiver part #C67ER which is a fit for a 2022 Kia Carnival. The installation does not require drilling but does require trimming of an underbody handle.

Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.

There is just a single difference between the Curt and etrailer trailer hitches that fit your 2023 Kia Carnival, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which you…

The best trailer hitch option for the 2019 Hyundai Santa Fe is the Curt Class III Round Tube Receiver Hitch part #C13195 which is going to provide you with about 250 more lbs of tongue weight capacity compared to the other option. I have attached an…

There are only some minor differences between the two trailer hitch receivers for your 2022 Kia Carnival, which are the following part numbers: - Draw-Tite Max-Frame Trailer Hitch Receiver #DT34GR - Curt Trailer Hitch Receiver #C67ER One of those…

Exactly! Both hitches are very similar in design and construction. That is usually what happens when hitches are custom-fit for your vehicle. The main difference is the finish. I personally prefer the matte finish that #e98839 has. We have them on…

First you will need the etrailer Trailer Hitch Receiver #e36KR for your 2023 Kia Carnival. This will give you a 2" receiver which will allow you to use the Curt Towing Starter Kit #C45554 which includes the ball mount, 2" ball, pin and clip…