Landing Gear Kit For A 2010 Keystone Montana Hickory

Question

Question:

What kit do I need, also what is the difference between the lead leg and the fallow leg.

asked by: Steve

0

Expert Reply:

When it comes to adding a landing gear set to your 2010 Keystone Montana Hickory The Landing Gear Set w/ Handle # RVLG-8HDL will work for you.

The landing gears have a durable, black powder coated outer tube and has zinc-finished inner tubes that provide excellent corrosion resistance. The kit comes with a manual crank but you can purchase the 12V DC motor # LC142178 separately. The landing gear kit has a combined weight capacity of 8,000 pounds.

The lead leg of your landing gear is the leg that has the motor and gear box attached to it directly. The follow leg has a connecting bar that is attached to it from the lead leg to move at the same rate as the lead leg. The follow leg does not attach to the motor assembly and gear box directly.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

Although you did not mention if it is the lead or follow leg that is not working, if it is the follow leg it may be that you have an issue with the gearbox and would need to replace it with Replacement Aluminum Gearbox #LG-179015 which will work…

view full answer...

Answer 2

Thanks for the pictures! Based on the part number of your motor it appears you have Venture landing gear. As such you will likely need follow leg rebuild kit #LC146060 or lead leg rebuild kit #LC146059 to fix your landing gear. Landing gear legs…

view full answer...

Answer 3

The Keystone Montana RV line actually uses a unique, custom landing gear system from Lippert. Because of this, Lippert produces specific OEM replacement legs that are designed specifically for your 2009 Keystone Montana 5th Wheel Trailer. For the…

view full answer...

Answer 4

Yes, the Landing Gear Set - 36-1/2" Lift - 8,000 lbs item #RVLG-8000 comes with both the gear box and the shaft that connects from the other side of the jack. I have attached a picture that will show you everything that is included when you…

view full answer...

Answer 5

Yes. You can rebuild the #LC178652 (follow leg) and #LC178653 (lead leg) with part #LC146059 for the lead leg and part #LC146060 for the follow leg.

view full answer...

Answer 6

I may have a solution for you, but you will need to determine the manufacturer and model number on your landing gear in order to determine if there are replacement parts that would work on them. Venture landing gear were one of the more popular…

view full answer...

Answer 7

It sounds like you need a leg repair kit, or possibly two if both sides are damaged or worn. For the lead leg, which is the leg with the motor/crank attached to it, you will want to go with Lippert Venture Lead Leg Repair Kit #LC146059. For the…

view full answer...

Answer 8

There are landing gear repair kits for the lead and follower legs on your Keystone Montana 5th wheel trailer. For the lead leg use #LC146059 and for the follower leg use #LC146060. The kits include the gears as well as other parts you may need to…

view full answer...

Answer 9

The Keystone Montana is unique in that it has its own set of landing gear legs with three weld stops (tabs) instead of two, and the only option we offer for that is a set of replacement legs: - Replacement Lead Leg for Keystone Montana 5th Wheel…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...