Replacement Front Jack for Lippert Ground Control 2.0 Landing Gear

Question

Question:

Your weight specifications say load rating of 4,000 lbs. can this be used on the Lippert Ground Control 2.0 2/4 landing gear leg. The weight rating is correct and the dimensions are spot on. I’ve already received it and it look perfect.

asked by: Chris C

1

Helpful Expert Reply:

The correct landing gear leg replacement for the Lippert Ground Control 2.0 that you have is actually the part # LC241846. We have no way of knowing if the # LG-179013 could work for you since it's never been tested although I can see how it looks similar.

expert reply by: Jameson C

1

Answer 1

The Replacement Heavy Duty Landing Gear Master Leg for Lippert Components Landing Gear #LC241846 is what they were referring to. This is the lead leg replacement. If you need other parts let me know and I'd be happy to assist.

view full answer...

Answer 2

Yes, the jack leg part #LC241846 that you referenced does measure 2-1/2 inch by 2-1/2 inch.

view full answer...

Answer 3

The Lippert Components Venture 5th Wheel RV Landing Gear Motor part #LC142178 is the motor you are looking for. This will be a direct replacement for the motor in your 2006 Northwood Artic Fox with Venture landing gear. Be very careful when…

view full answer...

Answer 4

I recommend replacing your lead leg with one that has the same dimensions as your new follow leg, the Replacement Lead Jack w/ Drop Leg #LG-179013. This leg is 29-1/2" long, 2-1/2" wide, has a 4,000 lb weight capacity and can be…

view full answer...

Answer 5

If the drive side leg of your powered trailer landing gear does not function but the follower side does, then it is likely that there is damage within the gear box. Since your trailer is a recent model year you may want to contact the manufacturer…

view full answer...

Answer 6

The Atwood 87701-SP three-switch panel that you referred to is now obsolete, no longer made, and none in stock. The only wiring information I could find for you is a poor quality drawing from Atwood/Lippert which I have attached. We do not have…

view full answer...

Answer 7

We have the same part number basically twice through two different vendors here that are the exact replacement motor you are looking for. The Lippert part #LC142178 and the Stromberg part #LG-142178. They are the exact same motors and if I were you…

view full answer...

Answer 8

I spoke with my contact at Lippert Components about what the correct replacement bevel gear kit would be for the front landing gear on your 2017 Open Range Roamer 371MBH. He said that the front landing gear for the Ground Control 2.0 actually…

view full answer...

Answer 9

The distance between the insides of the weld stops on the jack leg #LC362485 is 17-1/2 inches and the outer tube diameter is 2-1/2 inch by 2-1/2 inch.

view full answer...

Answer 10

For the front legs of a Lippert Ground Control 3.0 kit the replacement front jack leg solution you'd need is the part #LC362485. This will allow you to reuse your current motor and bracket. There isn't a gear replacement kit for the jack…

view full answer...

Answer 11

For front leg replacements for the Lippert Ground Control systems we have the part #LC362485 for just the leg portion or the part #LC305340 for a leg with the foot and motor as well. These will be the same length as what you have currently.

view full answer...

Answer 12

Because of its functionality with the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 you do need to replace the 421366 tongue jack with another one. The correct part is the following: - Replacement Tongue Jack…

view full answer...

Replacement Front Jack for Lippert Ground Control 2.0 Landing Gear

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching