Replacement Landing Gear Lippert Part Number 241286

Question

Question:

Lippert said I needed a 241286 for my landing gear. Is there a replacement part for this ?

asked by: Brian

0

Expert Reply:

The Replacement Heavy Duty Landing Gear Master Leg for Lippert Components Landing Gear # LC241846 is what they were referring to. This is the lead leg replacement.

If you need other parts let me know and I'd be happy to assist.

expert reply by: Jason S

0

Answer 1

After quite a bit of searching, I wasn't able to determine which bearings, races and seals were included with the hubs used on your Dexter Axles. You did a great job of providing me with lots of information, which makes my life easier but in this…

view full answer...

Answer 2

In order to determine which replacement lead leg you need, you'll need to know the model of the landing gear on your trailer (we have no way of knowing what you have), and measure it's outer tube length. For example, if you have a Venture,…

view full answer...

Answer 3

In order to determine the correct replacement landing gear leg for your 2013 Cedar Creek 36CKTS, you'll need to find out who makes your landing gear, and measure the outer tube length. For example, if you have a Venture, Lippert, or…

view full answer...

Answer 4

The correct replacement lead landing gear leg for a Ground Control 2.0 Leveling System is the Replacement Heavy Duty Driver Leg for Lippert Ground Control 2.0 Landing Gear part #LC241846 for standard (29-1/2" outer tuber body) or part #LC241845…

view full answer...

Answer 5

No, it is not recommended to try to straighten a bent jack tube. That would put more stress on the steel and there could also be internal damage that is unseen from the outside. I recommend replacing the damaged leg to avoid all potential issues…

view full answer...

Answer 6

The correct replacement lead leg you'll need is the part #LG-179013. This matches the dimensions you listed and is designed to fit as replacement for the Lippert landing gear jacks like yours as well.

view full answer...

Answer 7

I believe you are asking about the weld stops on the Replacement Heavy Duty Landing Gear Master Leg #LC241846. As shown in the attached diagram, the distance from the top of the upper weld stop to the bottom of the lower one on #LC241846 is 17.5…

view full answer...

Answer 8

For the driver leg part #LC241846 that you have the correct repair kit you'll want is the #LC146059.

view full answer...

Answer 9

Since the landing gear jack on your Lippert Ground Control 2.0 is the standard 29-1/2" height then you need the part #LC241846. The other part #LC241845 that you referenced is for if you had the longer version with the 33-1/2" measurement.…

view full answer...

Answer 10

The Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 - Extended #LC241845 is a replacement for the Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 and will work on either side.

view full answer...

Answer 11

The Lippert Landing Gear Leg model LCI PN241846 on your landing gear system refers to the Lippert Heavy Duty Landing Gear Master Leg #LC241846. For a repair kit that will work nicely with this leg, you can use the Lippert Lead Leg Repair Kit…

view full answer...

Answer 12

I spoke with my contact at Lippert Components about what the correct replacement bevel gear kit would be for the front landing gear on your 2017 Open Range Roamer 371MBH. He said that the front landing gear for the Ground Control 2.0 actually…

view full answer...

Replacement Landing Gear Lippert Part Number 241286

Product Page this Question was Asked From

Continue Researching