Availability of Trailer Hitch Receiver for Carrying Bikes With 2023 Kia Seltos

Question

Question:

Greetings etrailer. I decided to buy a 2023 Kia Seltos and now I need to add a hitch so I can carry my bike rack around. Please let me know what is available and I would be happy to buy it. Thank you for your time.

asked by: Andrea

0

Expert Reply:

The Draw-Tite Sportframe Trailer Hitch Receiver # DT65GR is exactly what you need to be able to use your bike rack with your 2023 Kia Seltos. This hitch as a 2" receiver and a max tongue weight of 300 lbs. It features a bolt-on installation and comes with a limited lifetime warranty.

expert reply by: Robin H

0

Answer 1

The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - 2" #DT65GR can tow a small boat trailer as long as the loaded trailer weight doesn't exceed 2,000lbs and the tongue weight doesn't exceed 300lbs. The more important thing to…

view full answer...

Answer 2

Yes, there is a 2" hitch available for your 2023 Kia Seltos, it is the Draw-Tite Trailer Hitch item #DT65GR. This hitch is custom fit and bolts to your Kia with included hardware. I really like this hitch because the crosstube mounts behind your…

view full answer...

Answer 3

We rate the install difficulty for the Draw-Tite #DT65GR on your 2022 Kia Seltos as a 5 out of 10, so it isn't overly difficult. Especially since you have done one before. There will be no drilling needed, but there is very minor trimming of a…

view full answer...

Answer 4

While we do have trailer hitch wiring for your 2021 Kia Seltos, wiring is vehicle-specific so will only fit the cars and trucks it is designed for. So the wiring for a Ford Focus won't fit your Seltos; instead, for a 4-way on your Seltos, here is…

view full answer...

Answer 5

I strongly recommend running the 12 volt power wire from the Curt Wiring Harness, #C59496, directly to the vehicle battery. The 12 volt accessory circuit was not designed to support the additional load of a trailer wiring harness. A wiring harness…

view full answer...

Answer 6

We do have a 7-way blade wiring harness available for your 2023 Toyota Highlander. What you need is the Tekonsha OEM Replacement Vehicle Wiring Harness #TK57VR. This plugs into the connection in your rear cargo area for installation. You can use the…

view full answer...

Answer 7

I recommend the Draw-Tite Sportframe Trailer Hitch Receiver #DT65GR for your 2023 Kia Seltos.The Draw-Tite hitch has a bolt-on installation and will give you the 2 inch by 2 inch receiver head opening. The trailer hitch has a maximum gross trailer…

view full answer...

Answer 8

Yes, there is a 4-way wiring harness for your 2023 Kia Seltos, It is the Curt Wiring Harness item #C89KR. This custom-fit T-One connector plugs into your Kia Seltos's wiring harness, which is located in your rear cargo area, behind the tail…

view full answer...

Answer 9

Though the etrailer #e75ZR will fit the Hybrid models of 2021 Toyota Highlander, it may interfere with the Hands-free Liftgate sensors and functionality may be very limited or possibly lost, unfortunately. This will be the same for all the hitches…

view full answer...

Answer 10

On a 7-Way connector the suggested minimum wire gauge for the White (ground) wire, the Red or Black (power) wire, and the Blue (brake power) wire is 12 gauge. The minimum wire gauge for the remaining Green (right turn/brake) wire, the Yellow (left…

view full answer...

Answer 11

Your trailer's brakes will still activate like normal if you have your breakaway kit not connected. It's not recommended to tow a trailer with a non-functioning breakaway kit though.

view full answer...

Answer 12

Sounds like you are looking for ring terminals to use with the circuit breaker part #9506P. For that you would want the Ring Terminal #44-5356A which has a 5/16 inner diameter and is designed for use with 10-12 gauge wires. The side of the breaker…

view full answer...