Trailer Hitch Wiring That Fits 2021 Kia Seltos

Question

Question:

Good morning I have a question regarding the custom wiring for towing electrical I purchase for a Ford focus the kit number 56273 And I never used it I lost the car because of hurricane ida last year, and now I have a kia seltos 2021, can I use présent kit 56273?

asked by: Olivier G

0

Expert Reply:

While we do have trailer hitch wiring for your 2021 Kia Seltos, wiring is vehicle-specific so will only fit the cars and trucks it is designed for. So the wiring for a Ford Focus won't fit your Seltos; instead, for a 4-way on your Seltos, here is exactly what you will need:

- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C89KR

expert reply by: Kyle S

0

Answer 1

Yes, the Curt 4-way trailer wiring harness part #C89KR that you referenced does fit your 2023 Kia Seltos. We have confirmed this with Tekonsha.

view full answer...

Answer 2

I strongly recommend running the 12 volt power wire from the Curt Wiring Harness, #C59496, directly to the vehicle battery. The 12 volt accessory circuit was not designed to support the additional load of a trailer wiring harness. A wiring harness…

view full answer...

Answer 3

Sounds like you are looking for ring terminals to use with the circuit breaker part #9506P. For that you would want the Ring Terminal #44-5356A which has a 5/16 inner diameter and is designed for use with 10-12 gauge wires. The side of the breaker…

view full answer...

Answer 4

Your trailer's brakes will still activate like normal if you have your breakaway kit not connected. It's not recommended to tow a trailer with a non-functioning breakaway kit though.

view full answer...

Answer 5

On a 7-Way connector the suggested minimum wire gauge for the White (ground) wire, the Red or Black (power) wire, and the Blue (brake power) wire is 12 gauge. The minimum wire gauge for the remaining Green (right turn/brake) wire, the Yellow (left…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Trailer Hitch Wiring That Fits 2021 Kia Seltos

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching