Will Curt Trailer Hitch Fit 2016 Chevy Silverado 3500 Cab & Chassis Without Factory Bumper

Question

Question:

Will this hitch work with a non factory bumper?

asked by: BRANDON C

0

Expert Reply:

Yes it will; a factory bumper is not needed for your 2016 Chevy Silverado 3500 cab and chassis in order to use the Curt Trailer Hitch Receiver # C15400.

expert reply by: Kyle S

0

Answer 1

I believe you meant to type 34 inch wide frame as that is the standard width for the cab and chassis trucks from outside to outside. I really like the Curt hitch part #C15800 as it is a fit for your 2006 Chevy Silverado 3500 cab and chassis and has…

view full answer...

Answer 2

In order to install Curt trailer hitch #C15800 on your 2012 Dodge Ram 4500 cab and chassis model you will have to drill into the frame because, like you have said, there are no holes in the frame already. The rivet that is in the rear most part of…

view full answer...

Answer 3

Yes, the Curt Trailer Hitch Receiver #C15800 you mention will work great as a class V hitch for your 2009 Chevrolet Silverado 3500. This hitch has a maximum GTW of 20,000-lbs, a maximum tongue weight capacity of 2,700-lbs, and has a 2-1/2" x…

view full answer...

Answer 4

We do offer both Class IV and Class V trailer hitches for the 2012 Silverado cab and chassis. All can be seen on the link provided. All require drilling and that the spacing of your frame rails be 34-inches outside to outside. The most popular among…

view full answer...

Answer 5

We have an option for you, but the Curt Trailer Hitch Receiver #C15800 measures just under 34 inches wide from outside to outside and is a custom-fit option for 2001 - 2021 Chevy/GMC 3500 Cab & Chassis, as well as 2010 - 2021 Ram 3500, 4500, 5500…

view full answer...

Answer 6

The Curt Trailer Hitch Receiver #C15800 that you referenced is designed for 34 inch wide trailer frames like what are on cab and chassis trucks. So the distance on the frame of the vehicle would need to be 34 inches measured from outside to outside.

view full answer...

Answer 7

The Curt Trailer Hitch Receiver, part #C15800 is a fit for your 2016 Chevrolet Silverado 3500 Cab and Chassis. This is a Class V hitch and it has a 2-1/2 inch receiver opening. All of the hardware needed for installation of this hitch is included. I…

view full answer...

Answer 8

The #C15800 is specifically designed to fit the cab and chassis models and is not a fit for your 2009 GMC Sierra 3500HD WT. The WT should have the same attachment points as the 3500 Pickup so the Curt Trailer Hitch Receiver #C15703 would be the…

view full answer...

Answer 9

Thank you for the photo, and while there is a 2-1/2 inch trailer hitch receiver that fits your 2021 Ram 5500 cab & chassis, I checked with the manufacturer, and the TorkLift hitch you mentioned will not fit. So for a 2-1/2 inch hitch, you will…

view full answer...

Answer 10

You'll need a hitch for a cab/chassis truck, because they use a narrower frame spread (34 inches outside to outside) than the 3500 pickup. The Curt Class V hitch, part #C15800 is the highest rated hitch we offer for your truck, and would work…

view full answer...

Answer 11

The 34 inch from outside to outside is a cab and chassis frame will allow for a few hitch fits. I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15800. This has dimensions to fit your frame. I've…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Will Curt Trailer Hitch Fit 2016 Chevy Silverado 3500 Cab & Chassis Without Factory Bumper

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching