Will the D&W Quick Connect Fitting Work w/ an Empire Faucet?

Question

Question:

Does the D-W quick disconnect fitting work with the Empire faucet

asked by: Robert K

0

Expert Reply:

Yes, the quick connect end of the D&W Inc. RV and Marine Quick Connect Garden Hose Adapter item # PF247007 is 1/2" in diameter and will fit in a 1/2" female quick connect port on the Empire Faucets Exterior RV Showers item # EM24FR.

expert reply by: Jerred H

0

Answer 1

The Torklift Tie Downs part #TLF3004 and #TLF2012 are sold as complete kits and do not have replacement parts sold for them. With either kit though you'll be able to use the Fast Guns so you wouldn't be replacing everything that you…

view full answer...

Answer 2

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 3

The quick connect fitting part #PF247007 is the standard size for hose quick disconnects so it would easily work for you as what you have would also be the same.

view full answer...

Answer 4

The Replacement Quick Connect Valve for D&W Inc. Spray-Away RV Exterior Hose System - Qty 1 #PF247008 has a 1/2" threaded female connection and is designed to work on the D&W Inc. Spray-Away RV Exterior Hose System -…

view full answer...

Answer 5

We have the exact adapter you are looking for. You will need the D&W Inc. RV and Marine Quick Connect Garden Hose Adapter for Spray-Away and Spray-Port #PF247007 which will give you the male quick disconnect connector you are looking for,…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 7

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 8

A junction box/7-way plug kit like Epicord #277-000141 or #HS381-9000 lets you convert the camper to match the 7-way RV blade type connector format. This avoids the extra connection points and potential trouble spots from using separate adapters.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hi Joe, Yep, you heard correct, you can go from a 2 inch shank to a 2-1/2 inch shank with your Reese weight distribution hitch without issue. One of the following 2-1/2 inch shanks should have the right rise/drop for your application. Here are the…

view full answer...

Answer 11

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Will the D&W Quick Connect Fitting Work w/ an Empire Faucet?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching