Replacement Replacement Pitch Arm for Solera Awning

Question

Question:

I have a 2017 keystone Springdale with Salreo awning awning model number is V000211531 just wondering what size would work 63-68

asked by: Bill V

0

Expert Reply:

The model number V000211531 you gave me is for the awning and the roller. The only way to know which size replacement arm you need is to measure the one currently on your 2017 Keystone Springdale Travel Trailer. The Replacement Pitch Arm Assembly for Solera XL item # LC74VR you were looking at measures 78".

For 63" arms you will want item # LC67VR

For 69" arms you will want item # LC375994

expert reply by: Jerred H

0

Answer 1

I attached a picture I got from Lippert that has their install instructions and diagnosis page for the #LC375994 that you referenced.

view full answer...

Answer 2

Hi Charles, I recommend the High Pointe RV Convection Microwave - Black #HP99ZR or Stainless Steel #HP49ZR. These convection microwaves are 20-1/2" wide x 14-3/4" tall x 18-11/16" deep so you should be able to just squeeze it in. The…

view full answer...

Answer 3

You're right that was an incredibly tiny diagram; so tiny that I couldn't make anything out, unfortunately. So in order to determine if the Replacement Pitch Arm Assembly for Solera XL 63" Flat Awning Support Arm - Black #LC67VR will…

view full answer...

Answer 4

I believe what you're looking for is the: -Replacement Pitch Arm Assembly for Solera XL 63" Flat Awning Support Arm #LC67VR. This arm measures 33" long, and is a direct replacement for the Solera XL 63" long flat awning support…

view full answer...

Answer 5

The Replacement Pitch Arm Assembly #LC375994 is 31.5" long overall which matches the measurement that you have. The Replacement Retaining Washers #LC431583 are needed to complete reinstallation of the new pitch arm.

view full answer...

Answer 6

Thanks for the photos, and from that it looks to me like you are asking if just the pitch arm assembly is available, and if so, the answer is yes, it is the Replacement Pitch Arm Assembly for Solera 69" Standard Flat Awning Support Arm…

view full answer...

Answer 7

I reached out to Lippert and you will need three retaining washers when installing the Replacement Pitch Arm Assembly for Solera XL 63" Flat Awning Support Arm - Black #LC67VR. If you don't already have them, you need the Replacement…

view full answer...

Answer 8

As for the vent replacement, I recommend sticking with the MaxxAir brand and going with the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - White #MA00-07000K. The The built-in rain shield on this powered roof…

view full answer...

Answer 9

By king pin sleeve I believe you are referring to a gooseneck to 5th wheel coupler adapter, and there is one for a square inner tube: - Gooseneck to 5th Wheel Trailer Coupler Adapter - Inner Tube - Square - 25,000 lbs #KPG5-Q25-IP The #KPG5-Q25-IP…

view full answer...