How Many Retaining Washers are Needed for Replacement Pitch Arm Assembly for Solera XL Installation

Question

Question:

How many retaining washers and part number is needed for part #LC67VR for 32” solvers pitch arm?

asked by: Janna P

0

Expert Reply:

I reached out to Lippert and you will need three retaining washers when installing the Replacement Pitch Arm Assembly for Solera XL 63" Flat Awning Support Arm - Black # LC67VR. If you don't already have them, you need the Replacement Retaining Washers for Solera Pitch Arm Assembly - Qty 1 # LC431583.

expert reply by: Robin H

0

Answer 1

You can reuse your current pin when installing the new Solera Pitch Arm part #LC375994 but you will need new retaining washers with part #LC431583.

view full answer...

Answer 2

It sounds like you're referring to the pitch arm for your awning. If that's the case then you'll need to measure your support arm, the wall mount portion in particular. The Replacement Pitch Arm for Solera XL Flat RV Awnings part #LC67VR…

view full answer...

Answer 3

You're right that was an incredibly tiny diagram; so tiny that I couldn't make anything out, unfortunately. So in order to determine if the Replacement Pitch Arm Assembly for Solera XL 63" Flat Awning Support Arm - Black #LC67VR will…

view full answer...

Answer 4

It sounds like you might be looking for the Replacement Retaining Washers for Solera Pitch Arm Assembly - Qty 1 #LC431583, which are used to replace the retaining washers needed for your Solera pitch arm assembly.

view full answer...

Answer 5

The Replacement Pitch Arm Assembly #LC375994 is 31.5" long overall which matches the measurement that you have. The Replacement Retaining Washers #LC431583 are needed to complete reinstallation of the new pitch arm.

view full answer...

Answer 6

I believe what you're looking for is the: -Replacement Pitch Arm Assembly for Solera XL 63" Flat Awning Support Arm #LC67VR. This arm measures 33" long, and is a direct replacement for the Solera XL 63" long flat awning support…

view full answer...

Answer 7

I contacted the manufacturer with the information you provided from the sticker on your 2020 Keystone Outback Solera Awning. They advised me the information is for the fabric itself and does not provide any information for the arms. In speaking with…

view full answer...

Answer 8

Without seeing your awning, I have no idea of how many parts you might need. I do know you have the Solera Awning, model V000431840. If you need to replace this awning's entire single arm assembly, which is the pitch arm and the gas strut, you…

view full answer...

Answer 9

Sorry to hear that! You will want to go over to the other side and measure the one that isn't broken. If the pitch arm is 33" then you'll need the Replacement Pitch Arm Assembly for Solera XL 63" Flat Awning Support Arm - Black…

view full answer...

Answer 10

There isn't an available replacement bolt and nut from Lippert for the Replacement Pitch Arm Assembly for Solera 69" Standard Flat Awning Support Arm - Black #LC375994, so a new arm would be required if yours is damaged. There is a…

view full answer...

Answer 11

For the Replacement Retaining Washers for Solera Pitch Arm Assembly - Qty 1 Item #LC431583 you can just use a socket and press them on by hand. Lippert has an install video, which I'll be sending to you, that you can see them easily doing it by…

view full answer...

Answer 12

Thanks for the photos, and from that it looks to me like you are asking if just the pitch arm assembly is available, and if so, the answer is yes, it is the Replacement Pitch Arm Assembly for Solera 69" Standard Flat Awning Support Arm…

view full answer...

How Many Retaining Washers are Needed for Replacement Pitch Arm Assembly for Solera XL Installation

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching