5-Way Trailer Plug to Wire to 1995 Chevy C1500

Question

Question:

Someone spliced the heck out of thing back in the day before plug and play options became available. I have 5-loose wires under the rear bumper and generally know where they should hook up—white, black, green, yellow, light green. I want to buy a round 5 pole connector, splice to the truck and mount underneath the bumper. Not sure what parts to order to make this happen so was hoping you could help. I don’t need trailer brakes.. just hauling small boats. Thanks

asked by: Tony Z

0

Expert Reply:

For a 5-way round connector you could wire to the wiring you have under your truck you'd want the part # PK11501 and you'd be set.

expert reply by: Jameson C

0

Answer 1

Before installing the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires #ETBC7 you will need to have a 4-pole wiring harness already installed. If you do not then I recommend the Curt Vehicle Wiring…

view full answer...

Answer 2

The likely functions of the wires on your 1995 Chevy Suburban are yellow for left turn and brake lights, green for right turn and brake lights, black (or brown) for running lights, and white for ground. But to be sure I highly recommend testing the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 9

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 10

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 11

I'm not sure why they include that replacement latch but that is not required for any of the aftermarket hitches or wiring. It is probably something related to the installation of the OEM hitch. The etrailer #e45ZR you referenced is what I would…

view full answer...

Answer 12

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

5-Way Trailer Plug to Wire to 1995 Chevy C1500

Product Page this Question was Asked From

Continue Researching