Replacement Converter Options for a Magnetek 900 Series Model 930 Converter

Question

Question:

Do I need to replace my 900 Series 930 Model, converter it is humming pretty loud,

asked by: Paul

0

Expert Reply:

Some buzzing or noise from your converter is normal, but it sounds like it has increased significantly which could be a sign that there is something wrong internally and may need to be replaced. The best way to verify this would be to have a certified technician take a look at it and see if it needs to be replaced.

If it is determined that the converter needs to be replaced you can use the Progressive Dynamics Inteli-Power RV Converter and Battery Charger # PD9130 for flooded lead acid, AGM, and gel batteries or the Progressive Dynamics Inteli-Power RV Converter and Battery Charger # PD9130LV for lithium iron phosphate batteries.

expert reply by: Scott S

0

Magnetek Series 900 Model 920 Label
(click to enlarge)

Answer 1

Yes. You can use the Progressive Dynamics Inteli-Power RV Converter and Battery Charger - 12V - 30 Amps #PD9130 to replace your Magnetek series 900 converter as long as you've got lead acid batteries. If you need to charge lithium batteries of…

view full answer...

Answer 2

Yes, the Progressive Dynamics part #PD9260C will work great as a replacement for the Magnetek 900 series model 950 that you have currently.

view full answer...

Answer 3

Since your Magnetek 940 is rated for 40 Amps I recommend going with the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger #PD9245C rated for 45 Amps instead of the model #PD9260C you mentioned that's rated for 60 Amps.…

view full answer...

Answer 4

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

I do have a simple wiring diagram for the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger - 12V - 45 Amps #PD9245C. Basically you just need to run the power wire from the converter directly to the DC distribution panel and…

view full answer...

Answer 7

Hey Bobby, You will want to use either solid or stranded copper wire between 2 and 14AWG for the positive and negative connections to the battery. The gauge will depend on the length of your run from the Progressive Dynamics PD9200 Series Battery…

view full answer...

Answer 8

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Answer 9

The fan on your Progressive Dynamics #PD9260C running more often than usual could mean a couple of things are going on here; and you're correct in thinking that most of them aren't a good sign. It sounds like you've cleaned out the vents…

view full answer...

Answer 10

We offer a direct replacement for your current 45A Parallax/Magnetek 6345 Power Center. The Progressive Dynamics Replacement Converter, part #PD4645V is exactly what you'd need. I've linked to a product description video for the #PD4645V…

view full answer...

Replacement Converter Options for a Magnetek 900 Series Model 930 Converter

Featured Help Information

Miscellaneous Media

Continue Researching