Progressive Dynamics RV Power Control Center Installation - 2020 Taxa Mantis Travel Trailer Video

Yes, all you'll need to do is disconnect the three wires running from the converter section in your Progressive Dynamics 4100 #PD4135K from the AC distribution panel (circuit breaker, ground bus bar, neutral bus bar). This will cut the…

The black wire you have shown is power for the converter that's built inside the Power Center #PD4135K. You'll need to wire it to a 15 amp circuit breaker on the AC side of the power center.

According to the instructions for the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4135K, the negative side of your battery will need to be connected to the backside of the converter. I have attached…

The Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp, #PD4135K, requires cutout dimensions of 10-1/4" long x 7" tall. Please compare this to your current installation for fitment. I…

In one way or another, the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger part #PD4135K is grounded to the chassis although it's a bit different for the AC and DC side. I have attached for you below an…

Yes, the red wires of the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp #PD4135K are going to be labeled with a 3-digit code with 001 being the wire for your battery's positive post and 002…

The white wire on the back of the Progressive Dynamics 4100 Series RV Converter #PD4135K just needs to be ran to the negative terminal on the battery.

According to Progressive Dynamics, with the 35 amp Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4135K you will need 8 gauge wire. I have added a link to a video review for you to check out as well.

The Progressive Dynamics 4100 Series RV Converter w/ Charge Wizard and AC/DC Distribution Panel #PD4135K is going to wire in the following fashion: On the front of the unit you'll have a green, white, and black wire. The green wire will connect…

The Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp #PD4135K uses a 30 amp main breaker and 20 amp branch breakers, as you can see by the cut out of the linked directions I added.

WF-8735P is a 35-amp panel model. To upgrade to a lithium ready system you will need the Progressive Dynamics #PD4135K Converter/Smart Charger rated for 35-Amp. this system includes a high voltage output to provide full, quick charge for your lithium…

Hey Paul, so the wire colors that were mentioned in the answer page you found for the part #PD4135K are in reference to the colors of the power center. On the front of the unit you'll have a green, white, and black wire. The green wire will…