Recommended Hydraulic Brake System for an Escort Boat Trailer

Question

Question:

I have an escort boat trailer that needs a completely new brake system coupler, lines, drums and shoe assemblies. I want to as well replace the leaf springs. Could you please help put together a list of parts that I will need. I believe that the escort trailer model is BT20GBBX Thank you

asked by: Joseph A

0

Expert Reply:

I will be happy to help you set up a new brake system for your Escort Trailer. I'll start from the back and work my way forward. I recommend the etrailer Hydraulic Brake Kit Left/Right Hand item # AKFBBRK-35-D. This is a 3,500 lbs set of brakes that are Marine-grade and designed for surge actuators.

If you have a single axle trailer you will want the Kodiak Hydraulic Brake Line Kit item # 18SI-BLKIT. For tandem axle trailers you will need the Kodiak Hydraulic Brake Line Kit item # 18TA-BLKIT. These are both 18' brake line kits.

For your brake actuator I recommend the Demco Hydraulic Brake Actuator item # DM72VR. This actuator is rated up to 7,000 lbs and has an EZ-Latch coupler mechanism for simple, secure hookup and disconnect.

I can't make a recommendation on hubs for your trailer without knowing your lug pattern for your wheels. I would also need some more information on the current springs you have on your trailer. You will want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other. The height of the spring and the distance from the spring eye to the center of the spring can also be helpful in finding the correct replacement. If you would like to email me back with that information I would be happy to find you a set of hubs and leaf springs.

expert reply by: Jerred H

0

Answer 1

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 2

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 3

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 4

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 5

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 6

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 9

In order to replace the Advent Analog Wall Thermostat ACTH11 you'll need the Air Distribution Box w/ Wall-Mounted Thermostat for Advent Air RV Air Conditioners part #ACRG15. This is a digital style replacement which is what you'll need since…

view full answer...

Answer 10

Yes, you can replace your GE air conditoner with an Advent air conditioner like the Advent Air RV Air Conditioner #ACM150. Additionally, you will also need a thermostat. For that, you can use the Air Distribution Box w/ Built-In Thermostat for Advent…

view full answer...