Does the Brophy Swiveling D-Ring Tie Down Anchor Come with Backer Plate

Question

Question:

Does this item include a backer plate?

asked by: BRYAN S

0

Expert Reply:

The Brophy Swiveling D-Ring Tie Down Anchor part # RR06 does not come with a backer plate and it's not typically used with one. The backer plate is not required but if you wish to use one you'll need to construct this on your own.

expert reply by: Conner L

0

Answer 1

If you look below the specs for the Trailer D-Ring Tie Down, #RR06, you will see that the lip is wider than the base . You would need to drill a hole that is 4-3/8 inches in diameter for the base to fit through and then use screws appropriate for the…

view full answer...

Answer 2

Installation hardware is not included with the Swivel D Ring part #RR06 due to the unknown nature of the surface that the end user will attach it to. Depending on the weight of the object that will be held down, and the thickness of the surface it…

view full answer...

Answer 3

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

view full answer...

Answer 4

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...

Answer 5

The etrailer E-Track Roller Idler #e67HR is 3" from the top of the e-track to the bottom of the roller.

view full answer...

Answer 6

With plywood walls that are as thin as yours, it's possible that they may not support what you are looking to do. The only way you will be able to utilize the Erickson Horizontal E-Track #EM59150 (2 feet) or #E19148 (5 feet) is by installing it…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

There is not a factory brake controller plug-in port on your 2018 Ford Transit T250 so in order to install your existing Tekonsha Primus Brake Controller you will need to hardwire it in using the Wiring Kit #5506. This kit will provide you with the…

view full answer...

Answer 9

You can absolutely install E-Tracks like the etrailer Horizontal E-Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4 #e42VR you were looking at in your Forest River Enclosed Cargo Trailer yourself. Now there are a few things to…

view full answer...

Answer 10

The etrailer E-Track Backing Plates with Hardware part #e76YR work with any of the etrailer Horizontal E-Tracks like part #e42VR. The track and backing plates allow for up to 2,000 lbs but you'll also be limited by the material you're…

view full answer...

Answer 11

Generally speaking bearing grease has so little water in it that significant expansion due to freezing temperatures is unlikely. Higher operating temperatures within the hubs while underway would potentially thin the grease but again not cause much…

view full answer...

Answer 12

Since your 5' x 10' traler has a V-nose, we recommend going with the Adco SFS AquaShed Trailer Cover For Trailers up to 12' Long #290-46002. This will allow a bit of extra room for the V-nose. With the included straps on the front and…

view full answer...

Does the Brophy Swiveling D-Ring Tie Down Anchor Come with Backer Plate

Product Page this Question was Asked From

Continue Researching