Can The NOCO Battery Box # 329-HM426 Be Vented To The Outside Of A Cargo Compartment

Question

Question:

Can your 329 hm 426 be mounted inside compartment in my 5th wheel and the lid fitted with vent hose

asked by: John B

0

Expert Reply:

The Commercial Grade Battery Box for Dual 6V Batteries # 329-HM426 is a hard molded plastic so you could definitely cut a hole in the lid and run a hose from it to a vent like the Valterra RV Battery Box Vent with Cover - White Cover # A10-3300-05 ( # A10-3300BK-05) which can be mounted to the wall of your trailer.

These vents fit 1-3/4" battery box hoses, which you would need to source from your local hardware store, and can be secured with hose clamps.

expert reply by: Kevin C

0

Answer 1

So the internal dimensions of the Torklift box part #TLA7700L that you referenced are 11-3/4 inches deep which is another way of saying tall. So since your battery is 11.02 inches tall this would easily be compatible. Since your width is 7.28 inches…

view full answer...

Answer 2

The TorkLift PowerArmor Solar Locking Battery Box part #TLA7700LS is not wide enough to fit two group 31 batteries. Group 31 batteries are 13" long by 6.72" wide by 9.44" tall. The only option that's big enough is the Commercial…

view full answer...

Answer 3

What you would normally do for a front-mounted winch is use an auxiliary battery and Isolator #PK5231201 between your Silverado's battery and the aux battery but the issue, as you mentioned, is the distance to the rear of your truck. The best…

view full answer...

Answer 4

Since we do not carry a direct model replacement for your Magnetek 6620 Power Converter, your best option is a full unit replacement. I recommend going with the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger…

view full answer...

Answer 5

The internal dimensions of the NOCO Commercial Grade Battery Box #329-HM426 are 14-5/8" long x 10-1/2" wide x 11-1/2" tall. The dimensions of the Trojan T-105 batteries are 10.30 inches wide, 7.11 inches deep, and 11.07 inches tall…

view full answer...

Answer 6

I recommend using the Tow-Rax Battery Box #329-HM426 for your upgraded 6V Trojan batteries. This box has internal dimensions of 11-25/32" long, 8-27/64" wide, and 10-15/16" tall which should be more than enough space to fit one…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 11

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 12

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...