Recommended Camper Tie Downs For A 2014 Toyota Tacoma

Question

Question:

Tiedown 2014 tacoma

asked by: Del C

0

Expert Reply:

If you're needing camper tie downs for your 2014 Toyota Tacoma then there are two different options based on whether your Tacoma is 2WD or 4WD:

For 2WD models you'll need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2308 and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLT3303.

For 4WD models you'll need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2303
TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLT3303.

I do want to note that fitment will also require your Tacoma to have no running boards or steps under the bed and a factory trailer hitch.

To complete your setup you'll also need some turnbuckles. For this I recommend the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs # TLS9020.

expert reply by: Kevin C

0

Answer 1

To mount a truck bed camper to a 2006 Toyota Tacoma you would need the following tie-downs: For 4WD Models without a board or step underneath the bed and a factory hitch: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLT2303 TorkLift…

view full answer...

Answer 2

While the Brophy Clamp On Camper Tie-Downs, #HSBP are not confirmed to fit the Toyota Tacoma due to the construction/material of truck bed, we do have an option that works for most slide-in truck campers. I suggest the TorkLift Custom Frame-Mounted…

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for. For the front, you'll want the TorkLift Camper Tie-Downs #TL87CR (TorkLift P/N…

view full answer...

Answer 6

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 7

Hey Rob, it looks like the TorkLift Camper Tie Downs #TLC3221 and #TLC2225 fits the 2020-2024 Chevrolet Silverado 2500 and 3500.

view full answer...

Recommended Camper Tie Downs For A 2014 Toyota Tacoma

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching