What Does The Tube Clamp, See Picture, Do On The Thule Van XT 2 Bike Rack

Question

Question:

We have 4 of the same part left over after assembling and installing the rack. Do you know what it is used for? There is a part number on it 8526380001.

asked by: Mark A

0

Expert Reply:

Those four items are used to help secure the trays when they are in the up position and not carrying bikes. They are the perfect size to fit around the tubes of this bike rack.

expert reply by: Mark Smith

0

Thule Elite Van XT Tube Clamps
(click to enlarge)

Answer 1

It looks like your Winnebago Solis 59PX is built on a Ram ProMaster chassis which the Thule Elite Van XT 2 Bike Rack #TH302013 is designed to fit. Just to give you a little reassurance about fitment the brackets measure 32-5/8" long and Thule…

view full answer...

Answer 2

I recently visited an RV show where they had an RV with the same style roof as your 2022 Winnebago Solis 59PX on display. It had an awning like the Thule HideAway Awning #TH490011 attached and the brackets used looked custom made by the RV…

view full answer...

Answer 3

If you are worried about the interference of your bike's handlebars when mounted on the Thule Elite Van XT 2 #TH302013 on your 2018 Ram ProMaster 3500 Van, unless your bikes have exceptionally long handlebars, your bikes will fit without…

view full answer...

Answer 4

From the hitch pin of the Thule #TH9037 to the very top measures 4.3 inches and for the Kuat #PVP20B the same dimension is 5-3/16 inches so it would have a little less rear door clearance.

view full answer...

Answer 5

So long as the wheelbase of your mountain bikes with 29 inch wheels is no more than 45-1/2 inches they will fit on the Elite XT Bike Rack for Ram ProMaster, which is the following part number: - Thule Elite Van XT 2 Bike Rack for Ram ProMaster Rear…

view full answer...

Answer 6

For your 2018 Ram ProMaster 2500 the SumoSprings rear suspension kit you'll need is the part #SSR-313-54. This has the most support at 2,800 lbs which will be ideal since you will be converting your setup to a camper. I'd first try it with…

view full answer...

Answer 7

Since you are loading your 2018 Ram ProMaster 2500 up to the GVWR I recommend starting off using the SumoSprings Solo Custom Helper Springs #SSR-313-54 for the rear axle. These are the heaviest duty option available which is what you need for your…

view full answer...

Answer 8

Thule does recommend using glue when installing the Promaster Bike Rack part #TH302013 but there is no drilling required to install it. The recommended glues are Dekalin MS 5, SIKA 252 or Terostat MS937

view full answer...

Answer 9

If the knob of your Thule Elite Van XT 2 Bike Rack for Ram ProMaster Rear Door #TH302013 has stripped out what that means is that the plastic housing that surround the nut has detached from the nut. What you would need to do is basically destroy the…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...