Jackets For The Sway Control Brackets To Reduce The Metal On Metal Contact Of Fastway/Equal-i-zer
Question:
I just got a e2 hitch system,on a camper I bought. On the L-bracket I have a rubber spacer/washer,for lack of another term, I cant find this in any videos, or parts manuals. I dont need one, I just need to know if I use this, or not. It shows signs of use,fits on the L-bracket perfectly. I thought I was supposed to have steel on steel friction control? This gives me steel on rubber. Looks like it will work fine.
asked by: Lance W
Helpful Expert Reply:
While I have never seen them made of rubber there are the Sway Bracket Jackets # EQ95-01-5150 made of plastic. These were designed for those who found the noise to be excessive between the metal brackets and spring bars. They are made by Equal-i-zer and will fit your Fastway as they use the same sway brackets. It is only recommended for use with Equal-i-zer as they have the 4-point sway control. With the brackets being the only points of sway prevention for the Fastway you are at a higher risk of sway issues if you use these.
Product Page this Question was Asked From
Sway Bracket Jackets for Equal-i-zer Weight Distribution Systems - Qty 2
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Brackets
- Equal-i-zer
- Equal-i-zer
more information >
Continue Researching
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Sway Bracket Jackets for Equal-i-zer Weight Distribution Systems - Qty 2
- Video: Equal-i-zer Thin Walled Socket Review
- Q&A: Sway Control Bracket Jacket to Quiet Equal-i-zer Weight Distribution/Sway Control Hitch
- Q&A: Recommended Torque for Tightening Curt Hitch Balls to Ball Mount
- Q&A: Which Equalizer Weight Distribution System is Recommended for 1,200 lbs Tongue Weight
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200 lbs TW
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 4,000 lbs GTW, 400 lbs TW
- Shop: Thin Walled Socket for Equal-i-zer Hitches
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 16,000 lbs GTW, 1,600 lbs TW
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Can 1,200 lb Equalizer Spring Bars Replace 1,000 lb Spring Bars
- Shop: Vehicle Sway Bars
- Shop: Roadmaster Rear Anti-Sway Bar - 1-1/2" Diameter
- Q&A: Weight Distribution System Recommendation for 2016 Ford F-150 5.0 Towing 9000 lb Trailer
- Q&A: How to Use Wheel Well to Ground Dimensions to Adjust Equalizer Spring Bar Tension
- Q&A: Best Weight Distribution System for Sway Control
- Video: Mount-n-Lock GennyGo RV Bumper-Mounted Generator and Cargo Carrier Kit Review
- Shop: Nerf Bars - Running Boards
- Video: Equal-i-zer Weight Distribution EQ95-01-5150 Review
- Search Results: seam sealer
- Search Results: l pin
- Search Results: pin clip
- Video: Lippert Solid Stance RV Step Support Kit Review
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Shop: Suspension Enhancement
- Article: 5 Things to Know About Weight Distribution Hitches
- Video: Review of Reese Weight Distribution - WD Only - RE44FR
- Search Results: weight distribution hitch
- Video: B&W Continuum Weight Distribution System Review
on Accessories and Parts
