Replacement Short Legs for Lippert Ground Control 3.0

Question

Question:

I need a Lippert 3.0 replacement stabilizer jack . I have broken of my jacks broken . It’s on a Jayco Nothpoint 383 fifth wheel trailer .

asked by: Chris B

0

Expert Reply:

There have been 2 different heights of smaller legs that come with the Lippert Ground Control 3.0 # LC675817 over the years so you'll need to measure and see if you have the 22-1/2" or the 24-1/2" rear legs in order to choose the correct replacement - this is the overall height in the retracted position.

Once you know which height you need you'll just choose from the following:

22-1/2"
Left - # LC342610
Right - # LC428493

24-1/2"
Left - # LC305339
Right - # LC344792

Attached is a review video for you to check out.

expert reply by: Jon G

0

Answer 1

I have a ground clearance answer for you. As far as the shortest retracted length, the Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System #LC428493 and the Replacement Short Left Rear Leg - Ground Control…

view full answer...

Answer 2

I was honestly unsure on whether the jacks are interchangeable so I reached out to the manufacturer. For the most part you can use the Replacement 22-1/2" Left Rear Leg for Lippert Ground Control 3.0 Electric Leveling System #LC342610 (428493)…

view full answer...

Answer 3

The orientation of left and right is most easily explained like you are in a drivers seat. So when seated in a drivers seat your left side is left and your right side is right. So the Replacement Short Left Rear Leg #LC342610 would be for the drivers…

view full answer...

Answer 4

I checked the parts list for the Ground Control 3.0 Electric Leveling System #LC358590 (4-Point Set) or #LC675817 (6-Point Set) and the jack tube by itself is not available as a replacement part. Due to that if you need a replacement leg you will…

view full answer...

Answer 5

Lippert actually has 2 inch shorter versions of the rear jacks of the Lippert ground control with the part #LC342610 for the left rear and then #LC428493 for the right hand side. We also have the lift kit part #RR23QX which can give your trailer a…

view full answer...

Answer 6

The Replacement Left Rear Leg for Lippert Components Ground Control 3.0 Electric Leveling System - Qty 1 #LC305339 is the replacement leg you want. The Lippert #LC342610 is 2 inches shorter and is for travel trailers with this system versus 5th wheel…

view full answer...

Answer 7

The Lippert Ground Control 3.0 Replacement Jacks are only available as complete assemblies with the Motor #LC343758 attached. Here is a list of all the different jacks. Lippert Ground Control 3.0 - 4-Point Set #LC358590 Front Legs #LC305340 Left Rear…

view full answer...

Answer 8

The Replacement Short Left Rear Leg #LC342610 uses 1/2"-20 x 1-1/2" bolts to attach to the Jack Bracket for Lippert Ground Control 3.0 #LC349975. I'm not entirely certain what you are referencing in terms of "whole kit" but if…

view full answer...

Answer 9

Other than potentially pinching or damaging the wiring on your Ground Control 3.0 System #LC358590, I don't see any reason why you can't do this; it's really no different than taking the jack off and re-installing it. My tech contact over…

view full answer...

Answer 10

Yes, the Short Left Leg #LC342610 is paired correctly with the Short Right Leg #LC428493 for the Lippert Ground Control 3.0 leveling system. The foot pad is not removeable though so you'll want to take that into account for your clearance.…

view full answer...

Answer 11

The distance between the insides of the weld stops on the jack leg #LC362485 is 17-1/2 inches and the outer tube diameter is 2-1/2 inch by 2-1/2 inch.

view full answer...

Answer 12

No, the hall effect motor does not have to be greased, but per the service manual if the jacks are down for an extended period, it is recommended to spray the exposed leveling jack tubes with lubricant every 3 months for protection. If you live in a…

view full answer...