Measurement of Flat Part of CE Smith 5-1/2 Inch & 6-1/2 Inch Gusset

Question

Question:

Re: CE Smith gussets What is the measurement of the flat part of the gussets, both for the 5-1/2 and 6-1/2 Thanks

asked by: Gary H

0

Expert Reply:

The flat center portion measures 3 inches for the CE Smith Gusset for Boat Trailer Frames - 5-1/2" Long # CE26240A40, and 4 inches for the CE Smith Gusset for Boat Trailer Frames - 6-1/2" Long # CE26241A40.

expert reply by: Kyle S

0

Answer 1

There are a couple potential benefits to going with larger tires and wheels on your home built kayak trailer. The first is that a larger tire will likely raise your trailer a bit, resulting in better ground clearance when traveling. You will just…

view full answer...

Answer 2

Trailer tires that are the same size but with different load ratings will have different capacities. A load range C tire will have a higher capacity than a load range B tire of the same size. The Kenda 4.80-12 Bias Trailer Tire with 12 Inch White…

view full answer...

Answer 3

Going from the tire size of 205/75-15 to 225/75-15 is a pretty common change for trailer wheels. There are two things you'll want to verify though. First is that your wheel is either 6 inches wide or 6-1/2 inches wide. Those two widths are…

view full answer...

Answer 4

What's the current tire size? I don't recognize '155r s 78s' as a tire size, nor can I find anything online about it. The 175/80-13 tire you mentioned, part #AM3S060 is a Load Range B (1100 lb per tire capacity) bias ply tire mounted…

view full answer...

Answer 5

The 12 inch tires that we carry are rated for 65 miles per hour. Any faster than that for extended periods and the excessive heat build up will cause tire failure. To get a tire with a higher speed rating you would have to go up in size. That also…

view full answer...

Answer 6

The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063" diameter L44649 bearing and the BT8 spindle uses a 0.99" diameter L44643 bearing. In…

view full answer...

Answer 7

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 10

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 11

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Measurement of Flat Part of CE Smith 5-1/2 Inch & 6-1/2 Inch Gusset

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching