Stealth Trailer Hitch For A 2019 BMW X4

Question

Question:

Good morning. Im looking for a rack only hitch for a 2019 BMW X4 Xdrive30i. I can find it on stealth hitchs site but no part number and cant find it on your site. Our dealer# is 4756093

asked by: Ty H

0

Expert Reply:

The Stealth Hitches Hidden Trailer Hitch Receiver # SH75VR is the hitch that we offer for your 2019 BMW X4. It comes with the include towing kit. It has an included receiver attachment to mount a bike rack or cargo carrier. If you want the towing option you need The Stealth Hitches Hidden Rack Receiver # SH99VR.

The trailer hitch has a totally hidden design that offers a clean, from-the-factory-look. It has a simple bolt-on installation with no drilling or welding required. It has a black powder coat finish that offers a superior rust protection.

The trailer hitch has a maximum tongue weight up to 600 pounds.

expert reply by: Noah E

0

Answer 1

I have a great solution for you. Unfortunately since the Thule Xporter #TH500XTB clamps onto the bed rails of your truck, it will not work with a Truxedo tonneau cover. If you have a Trexedo tonneau cover that attaches fully inside the bed's bed…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 7

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

I would love to help you with this Adam, but I am going to need a bit of information on your exact setup to determine what all you will need. Can you tell me how heavy your car trailer is when loaded and how much extension you will need? Also I will…

view full answer...

Answer 10

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 11

The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system it's…

view full answer...

Answer 12

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Stealth Trailer Hitch For A 2019 BMW X4

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching