Parts Needed to Flat Tow 2007 Jeep Wrangler With Off-Road Bumper & D-Rings

Question

Question:

Looking for a way to toad my 2007 jeep wrangler. I have a roadmaster stowmaster. I have a aftermarket front bumper with D-ring plates. I see roadmaster makes an D adapter but its round how could I used the stowmaster for this application?

asked by: Paul F

0

Expert Reply:

There isn't a way to use the Stowmaster tow bar with the D-Ring bumper mounts, so you'll need a new tow bar to flat tow your 2007 Jeep Wrangler. The exact parts you need to flat tow your '07 Wrangler with your D-ring bumper are the following:

- 3/4" Shackle Mounts: Jeep D-Ring Bumper Mounts # RM-035
or
- 1" Shackle Mounts: Jeep D-Ring Bumper Mounts # RM-035-1

- Tow Bar: Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522

- Safety Chains: Roadmaster Safety Cables # RM-646

- Wiring Kit: Roadmaster Wiring Kit # RM-152-98146-7

- Supplemental Braking System: Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251

expert reply by: Kyle S

0

Answer 1

Yes you will need to pull the #19 fuse when flat towing your 2013 Honda CR-V. For this purpose we do recommend using the fuse bypass #RM76511, so you do not have to go messing with the fuse box every time you want to tow. There is not a specific…

view full answer...

Answer 2

I went to the warehouse to pull the RoadMaster Coupler Pin for Car-Mounted Tow Bars #RM-910032 referenced in your question and I took a couple of measurements to get the dimensions you are looking for. The length of the coupler pin is right at 3…

view full answer...

Answer 3

I spoke to my contact at Roadmaster and while she had a hard time finding your specific serial number in their system she was confident that your tow bar was made in 2010.

view full answer...

Answer 4

The Roadmaster Fusemaster Fuse Bypass part #RM76511 that you referenced is designed for vehicles that require the removal of a fuse in order for them to be flat-towed. Instead of having to remove the fuse you would simply install this product and it…

view full answer...

Answer 5

What you have in your picture is a very old StowMaster Tow Bar #RM-501 which is still attached to some base plates. I reached out to my contact at Roadmaster who said the serial number from the StowMaster indicates that it is rated for 5,000 lbs but…

view full answer...

Answer 6

The coupler pin recommended for the Roadmaster Stowmaster part #RM-501 that you referenced is the part #RM-910032.

view full answer...

Answer 7

It very well might. Different circuits are affected in different vehicles. The reason you pull the fuse or bypass it is to prevent the vehicle battery from being discharged while its being flat towed. Try pulling the involved fuse first for a few…

view full answer...

Answer 8

If pulling a fuse was required to flat tow your 2002 Honda CR-V it would be listed as a requirement under the recreational towing section of the owners manual. I did some checking as well and couldn't find any info that said a fuse needed to be…

view full answer...

Answer 9

I spoke with Roadmaster and their tech stated that the serial number is so old that they no do not have it listed in their database so I am unable to find the year and series of your StowMaster tow bar. He did state that the weight capacity would be…

view full answer...

Answer 10

The Roadmaster #RM-521424-4 crossbar-style base plate is an EZ4 Series, so it will connect with the etrailer #E44ZR tow bar. Regarding the safety cables included in the etrailer tow bar; they measure 54-1/2" in legnth. The snap hooks measure…

view full answer...

Answer 11

For your 2004 Ford F-150 4x4, we can offer you everything you will need to flat tow the truck behind your RV. First you will need a base plate kit. I recommend #495-1A that you referenced. As you know, when not in use, the part that is visible can be…

view full answer...

Answer 12

In order to flat tow your 2013 Chevy 1500, you'll need a few different parts: tow bar, base plates, safety cables, lights and a supplemental braking system (which you already have). I've broken down each individual part you'll need below.…

view full answer...