Does Curt Trailer Hitch Receiver Fit 2022 Hyundai Tucson Plug-In Hybrid Limited

Question

Question:

Tried to get Hyundai dealer to install a 2 inch Hitch on my new vehicle. they stated that the plugin would not accept 2 inch because of conflict with Battery. You say your model C94WR does fit the 2022 Hyundai Tucson Limited Hybrid PLUG IN am I to assume can I count on your expertise before I order the C94WR for my new vehicle? PLUGIN IN Version?

asked by: William W

1

Helpful Expert Reply:

Yes it sure does; you can absolutely install the Curt trailer hitch on your 2022 Hyundai Tucson Plug-In Hybrid Limited. The correct part number for your vehicle is the following:

- Curt Trailer Hitch Receiver # C94WR

I verified with Curt that the # C94WR will fit your Tucson, and bolts onto the frame of your vehicle so there won't be any type of interference with the battery location.

expert reply by: Kyle S

1

Answer 1

It looks like the instructions for the Curt #C94WR are back up and running. That being said, they do mention the panel that needs to be removed. We do mention that trimming may be needed to reattach this panel, but with this being as new as it is,…

view full answer...

Answer 2

The trailer hitch I recommend for a 2023 Hyundai Tucson is the Curt Trailer Hitch Receiver part #C94WR which I confirmed as a fit with Curt for all models, including the Hybrid. This trailer hitch features a bolt-on installation so there is no…

view full answer...

Answer 3

The Curt Class III Hitch #C94WR is designed to fit all options for the 2022 Hyundai Tucson, including the PHEV. This will require no drilling to attach, but there is an underbody panel that must be temporarily removed while bolting the hitch up.…

view full answer...

Answer 4

Yes, this Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part #C94WR is a compatible hitch receiver and confirmed to fit your 2022 Hyundai Tucson Hybrid Limited.

view full answer...

Answer 5

The Curt #C94WR and etrailer #e38KR fit your 2022 Hyundai Tucson PHEV. Since they are confirmed to fit all models none of the differences impact the fit of the hitch on the vehicle. These are all Class III hitches with a 2" receiver and have the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...