Curt Pintle Hitch - Pintle Hook - Ball Combo - C45922 Review Video

Pintle hitches are made to fit certain sized Lunette rings. The rings that we carry are only available in 2-1/2" or 3" diameter sizes. For example, the Curt Pintle Hook for 2" Hitches #C48004 fits lunette ring couplers with a minimum…

The Curt Pintle Hook with 2-5/16" Ball - 2-1/2" Hitches - 20,000 lbs #C45908 can be latched and locked in the up position to allow you to use a standard coupler with the hitch ball. I've attached a video to assist.

While I'm not able to verify if the B&W Pintle Hook Mounting Plate #BWPMHD14005 can fit without bumper or spare tire interference in the rise position on your 2018 Jeep Wrangler Unlimited (we just haven't had a chance to test this), I did…

Though the Replacement Shank for Curt Adjustable 2-Ball Mount #C45917 does not include the anti-rattle bolt, we do have it available separately. For this, you will need the Replacement Anti-Rattle Set Screw with Wrench for Curt Channel Style…

A BulletProof hitch double ball setup will not fit in the channel of the Curt shank part #C45917 the distance between the holes and the pin diameter doesn't match. You'd need to stick with a Curt ball setup part #C45912 instead.

The Replacement Shank #C45917 is for the Curt Adjustable 2-Ball Channel Mount #C45902 which has a 5-1/4" rise/6" drop. I reached out to Curt and my contact said that at this time (July 2020) there is no replacement shank for the Curt…

While your Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches - Matte Black #ERT00110 will physically fit the shank of the Shocker Hitch HD Ball Mount #SHK35VR, it will also interfere with the design of the shock absorber. As…

We have Gen-Y torsion style adjustable ball mounts with 21k capacities like the part #325-GH-1825 for a 3 inch hitch or part #325-GH-1324 for a 2-1/2 inch hitch.

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

The best and only option we have that covers everything you need is the Curt Pintle Hook Combo part #C45908 which fits the 2-1/2 inch hitch size, has a 2-5/16 inch hitch ball, is adjustable in height, and has a 20k capacity.

In regards to fifth-wheel hitches, there are a number of jaw types. A slide bar jaw is found on the less expensive hitches, such as the Pro Series #PS30129. This type of jaw is a secure one for your trailer but you will notice some king pin noise and…

The two best options from what you mentioned are the Reese M5 part #RP30918 and the Companion #BWRVK3600. If you wanted to go with a Curt the A25 part #C16046 would be the better option as this essentially is the updated version of the Q series with…