Replacement for 14x6 Chrome Wheel with 5 on 4-1/2 Bolt Pattern

Question

Question:

i need a chrome modular 5 on 4 and 1/2 bolt pattern 14x6 wheel

asked by: Virgil F

0

Expert Reply:

The closest we have to a chrome finish is the PVD finish which comes in Black # 460545MBPVD. If you're looking to replace all of your wheels then this PVD finish is supposed to be better than a chrome finish but if you're looking to match other wheels then you won't want to mix this in with what you currently have as it won't match correctly.

Attached are some review videos so you can see what these look like.

expert reply by: Jon G

0

Answer 1

The PVD or physical vapor deposition that you find on wheels like #460545MBPVD is a tough wear-resistant aluminum coating that is bound to the wheel at a molecular level. It is corrosion resistant until it has been chipped much like chrome plating…

view full answer...

Answer 2

Trailer wheels are typically a zero offset meaning the point where the wheel connects to the hub is directly centered with the wheel itself. The Taskmaster Steel Modular Trailer Wheel - 14" x 6" Rim #460545MBPVD will have a 3 inch…

view full answer...

Answer 3

A 205/75-14 tire will fit a 14 inch rim that's 5, 5-1/2, 6 or 6-1/2 inches wide. I'd be happy to make a few recommendations for a 5 on 4-1/2 inch bolt pattern wheel that's compatible with your tire size. On the more affordable end of the…

view full answer...

Answer 4

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 5

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 9

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 10

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 11

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Replacement for 14x6 Chrome Wheel with 5 on 4-1/2 Bolt Pattern

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching