1 Inch Wide Replacement Velcro Strip for Access TonnoSport and Vanish Covers

Question

Question:

I nee replacement velcro-hook side. I think I need A40625. I inch wide- Thank you

asked by: Lee P

1

Helpful Expert Reply:

The Replacement Velcro Strip for Access TonnoSport and Vanish Covers - 1" Wide x 17' Long item # A60270 you were looking at is 1" wide and nearly identical to the A40625 you mentioned that is no longer available. The only difference is the edge is slightly tapered on the # A60270 velcro strip. The Velcro is compatible with the Access Tonnosport and Vanish tonneau covers.

expert reply by: Jerred H

1

Answer 1

The only difference between the Access Replacement Velcro Strips #A30474 and #A60270 is that A30474 is 1-1/2 inches wide and A60270 is only 1 inch wide. They are both 17 feet long and come with the 4 screws to help keep them in place.

view full answer...

Answer 2

I have an answer for you. Unfortunately, we do not carry Gator-brand tonneau covers, so we will not be able to confirm for sure if our replacement replacement Access Velcro strips will fit your tonneau. However, judging by your attached picture and…

view full answer...

Answer 3

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 4

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 5

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 6

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 9

From our experiences the Harbor Freight trailers like yours have a hub bore that requires a cap or Bearing Buddy that measures 2.047 inches like the #BB2047 you referenced. We don't have a standard cap that fits this size so the Bearing Buddy is…

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

1 Inch Wide Replacement Velcro Strip for Access TonnoSport and Vanish Covers

Product Page this Question was Asked From

Continue Researching