What is the Difference Between Access Replacement Velcro Strips # A30474 and # A60270

Question

Question:

Would like to know the difference in tonneau cover part number ...A60270 and A30474...? Does the A60270 have an adhesive backing as well as the screws to keep it in place ?

asked by: Steve H

0

Expert Reply:

The only difference between the Access Replacement Velcro Strips # A30474 and # A60270 is that A30474 is 1-1/2 inches wide and A60270 is only 1 inch wide. They are both 17 feet long and come with the 4 screws to help keep them in place.

expert reply by: Jon G

0

Answer 1

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 2

We have the part #A30474 which is a 1-1/2 inch wide Velcro strip replacement for Access tonneau covers like what you have. The overall length is 17 feet but is designed to be cut down to size as needed.

view full answer...

Answer 3

I pulled the Replacement Velcro Strip, part #A30474 from the warehouse and opened the package to see how it is attached. This is designed to replace the hook side of the velcro fastener on Tonneau covers. Per the instructions you would drill out the…

view full answer...

Answer 4

I recommend Replacement Velcro strip for original roll up Access Tonneau Covers part #A30474. The strip is 17 feet long and 1-1/2 inches wide. You can cut the strip to fit the length of your short bed on the 2014 Ford F-250. The strip comes with the…

view full answer...

Answer 5

We have the Velcro you need for your Access Tonneau cover for your 2012 F-150. For the hook portion that installs on the top rail you can use part #A60270 for the 17-ft long and 1-inch wide, and part #A30474 for the 17-ft long strip that is 1-1/2…

view full answer...

Answer 6

I reached out to my contact at Access and the replacement cover is #A22020191. The replacement Velcro for the frame is the Replacement Velcro Strip for Access Tonneau Covers - 1" x 17' #A60270.

view full answer...

Answer 7

Replacement Truxedo Shur-Bond Velcro Brand Fastener #TX1117876 is the same 1 inch width and it is the hook portion only just like #A60270 which is the Access replacement part. So it will fit its just that the 2 parts, the Tonneau cover and strip,…

view full answer...

Answer 8

Yes, the replacement Velcro strip #A60270 (17x1 inches) will replace the Velcro strip on your tonneau cover with a Velcro strip measuring 1-1/4 inches wide. The replacement Velcro strips are made in 1 inch #A60270 and 1-1/2 inch #A30474 but not 1-1/4…

view full answer...

Answer 9

We have the Replacement Tarp #A82BG for the Access Lorado Soft, Roll-Up Tonneau Cover #834532001767 on your 2014 Ram 2500 short bed. You will need the Replacement Velcro Strip #A30474 to replace the strips on your rails. These are recommended to be…

view full answer...

Answer 10

Yes, I confirmed with my contact at TruXedo that the Replacement TruXedo Shur-Bond Velcro Brand Fastener for 8' Beds #TX1117877 comes with 2 1-inch Velcro fasteners.

view full answer...

Answer 11

Although we do not carry Lund tonneau covers or their replacement parts we do have velcro strips that are 1-1/2" wide in the Replacement Velcro Strip part #A30474. The velcro is 17" long which should be more than enough for your 2009 Toyota…

view full answer...

Answer 12

Without knowing what brand tonneau cover you have on your 2005 Ford F-250 it is hard for me to say for sure what replacement hook and loop strips you would need. But if you have a Truxedo or an Access check out the links I attached to the right.

view full answer...