Will Weight Distribution System Need Readjusted After Timbren Install On 2021 Ford F-150

Question

Question:

will i have to readjust my 4 point sway and weight system after installing the timbrens

asked by: Crane

0

Expert Reply:

Yes, you'll need to readjust the weight distribution system after installing the Timbren Rear Suspension Enhancement System part # TFR1504E on a 2021 Ford F-150. The reason for this is because the rear end sag will be reduced with the springs so adjustments to the system will need to be made to account for this.

expert reply by: Conner L

0

Answer 1

When installing the #TFR1504E, Timbren recommends putting the rear of the vehicle up on jack stands so the rear axle hangs free. In many cases, installation is easier if you remove the back wheels, it makes everything much simpler to reach. If you…

view full answer...

Answer 2

Yes; when using a weight distribution hitch while towing with your 2019 Ford F-150, using the Timbren Rear Suspension Enhancement System #TFR1504E will help with stability. The weight distribution will help with leveling, but the Timbrens are going…

view full answer...

Answer 3

While the Timbren Rear Suspension Enhancement System #TFR1504E may be able to technically fit without using the spacer, it will likely not offer you the best performance. It is supposed to be pretty tight and without the use of the spacer, the…

view full answer...

Answer 4

For great rear jounce springs for your 2022 Ford F-150, I recommend the Timbren Rear Suspension Enhancement System #TFR1504E. Apart from the 6,000 pound load capacity, the Timbrens becomes more rigid as more weight is added and results in greater…

view full answer...

Answer 5

The biggest causes of persistent trailer sway are improper trailer loading where there isn't enough tongue weight relative to total trailer weight (it needs to be 10-15 percent of total weight) and/or the trailer not sitting level when towing. If…

view full answer...

Answer 6

The Timbren Kit item #TFR1504E you referenced does fit your 2022 Ford F-150 and can be installed with the RAS kit item #RAS3611-Y that you already have installed. They are not designed to work together though. It will be a tight fit when you are…

view full answer...

Answer 7

Thank you for all of the info! For your application I recommend the Timbren Rear Suspension Enhancement System #TFR1504E. These replace the OEM bump stops on your 2022 Ford F-150 and give your suspension help without requiring any maintenance. These…

view full answer...

Answer 8

I sure can; I checked directly with Timbren for you and can verify that the correct part number for both the 2WD and 4WD models of 2023 Ford F-150 is the following: - Timbren Rear Suspension Enhancement System #TFR1504E You made a nice choice with…

view full answer...

Answer 9

The Timbren Rear Suspension Enhancement System 2019 Ford F-150 part #TFR1504E will help to reduce the rear sag on the Ford F-150. However, I do recommend to take a look at the weight distribution setup first to make sure the system is not…

view full answer...

Answer 10

I spoke with my contact over at Timbren and he said there isn't a torque value for the hardware when installing kit #TFR1504E. He said to just tighten them until snug using regular hand tools. I know that is very subjective but tight using hand…

view full answer...

Answer 11

A lot of the bucking and feedback issues you are having when towing your 5th Wheel with your 2016 F-150 may be happening as a result of the 8 inch Ranch Hitch Offset #AM3139 you referenced in your question. The offset you are using pushes the tongue…

view full answer...

Answer 12

The main difference between the Timbren Suspension Enhancement System #TFRTT1504E and the Timbren Rear Suspension Enhancement System #TFR1504E on your 2022 Ford F-150 is going to be the weight capacity and purpose the system is intended for. The…

view full answer...

Will Weight Distribution System Need Readjusted After Timbren Install On 2021 Ford F-150

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching