Timbren Rear Suspension Enhancement System Installation - 2016 Ford F-150 TFR1504E Video

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

When installing the #TFR1504E, Timbren recommends putting the rear of the vehicle up on jack stands so the rear axle hangs free. In many cases, installation is easier if you remove the back wheels, it makes everything much simpler to reach. If you…

There should be clearance when using the Timbren Rear Suspension Enhancement System #TFR1504E without load in the truck on your 2016 Ford F-150. I recommend removing the spacer. The empty ride of your vehicle is not to be effected by the system…

Any time the trailer weighs more than half of the weight of the tow vehicle we strongly recommend a weight distribution system. You'll see improvements in handling, braking, and sway reduction even with a heavier duty truck like what you have. I…

Yes; when using a weight distribution hitch while towing with your 2019 Ford F-150, using the Timbren Rear Suspension Enhancement System #TFR1504E will help with stability. The weight distribution will help with leveling, but the Timbrens are going…

As for comparing the Timbrens #TGMRCK15S to the Roadmaster Active Suspension Custom Leaf Spring Enhancement Kit #RAS54FR on your 2021 Chevy Silverado 1500 (4x4), the answer really depends on how much you tow or need suspension support for your Chevy.…

To charge the battery in the Engager Trailer BreakAway Kit, #20099, you can attach the wire from the 12 volt circuit on the trailer side 7-Way (1 oclock position on the back of the trailer side 7-Way where the wires attach) to the input wire on the…

What you are going to need to do is install a 7-way on your trailer so that you can run a 12 volt accessory circuit from the connector to a battery like you are interested in doing. You should note that this will only maintain a fully charged…

When installing the Timbren Rear Suspension Enhancement System #TFR1504E, they will be labeled left and right, and the left side will be the driver's side while the right side will be the passenger's side. I have added a link to a video of…

While the Timbren Rear Suspension Enhancement System #TFR1504E may be able to technically fit without using the spacer, it will likely not offer you the best performance. It is supposed to be pretty tight and without the use of the spacer, the…

Yes, you'll need to readjust the weight distribution system after installing the Timbren Rear Suspension Enhancement System part #TFR1504E on a 2021 Ford F-150. The reason for this is because the rear end sag will be reduced with the springs so…

Both of the kits you mentioned are a fit for your 2016 Ford F-150. The difference is that the part #TFR1504E has a 6,000 lb capacity and the part #TFRTT1504E has a 7,000 lb capacity. You would want to go with the lower rated spring as it will be a…