Does 2017 Ford F150 Need to Be On Jack Stands-Install Timbren Rear Suspension Enhancement TFR1504E

Question

Question:

I was wondering if you need to lift you Truck on Jack stands to install this. Or can I do it with the truk sitting normally on the ground. I can get in there just fine.

asked by: Stetson

0

Expert Reply:

When installing the # TFR1504E, Timbren recommends putting the rear of the vehicle up on jack stands so the rear axle hangs free. In many cases, installation is easier if you remove the back wheels, it makes everything much simpler to reach.

If you click the provided link, you can see an installation video that you might find helpful.

expert reply by: Mike L

0

Answer 1

Yes, you'll need to readjust the weight distribution system after installing the Timbren Rear Suspension Enhancement System part #TFR1504E on a 2021 Ford F-150. The reason for this is because the rear end sag will be reduced with the springs so…

view full answer...

Answer 2

When installing the Timbren Rear Suspension Enhancement System #TFR1504E, they will be labeled left and right, and the left side will be the driver's side while the right side will be the passenger's side. I have added a link to a video of…

view full answer...

Answer 3

There should be clearance when using the Timbren Rear Suspension Enhancement System #TFR1504E without load in the truck on your 2016 Ford F-150. I recommend removing the spacer. The empty ride of your vehicle is not to be effected by the system…

view full answer...

Answer 4

The Timbren suspension enhancement kit I recommend for your 2020 Ford F-150 is the Timbren Rear Suspension Enhancement System #TFR1504E which is a fit for both 2WD and 4WD models of F-150. The reason this is the best one is because the spring in this…

view full answer...

Answer 5

To remove the front cover #LC643923 from your Solera Awning there are indeed 2 screws that need to be removed. If you look at the back f the idler head unit you can see the locations where the screws reside that you need to remove. I have attached a…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Michael, thanks for reaching out! The Timbren Active Off-Road Bumpstops #T28GR you installed on your 2018 Ford F-150 unfortunately have that reputation among users (although Timbren claims their systems provide a smooth ride). Because of this we…

view full answer...

Answer 9

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually improves…

view full answer...

Answer 10

Yes, you are going to also need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 when using the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 with your Road Armor pin box. For a suspension enhancement I…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Does 2017 Ford F150 Need to Be On Jack Stands-Install Timbren Rear Suspension Enhancement TFR1504E

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching