Best Hitch Receiver for a 2020 Subaru Outback Wagon

Question

Question:

Hello! I am looking for a hitch for my 2020 subaru outback 2.5. Im between the draw-tite DT74YR vs your e-trailer hitch. Any recommendations between the two? Thanks!

asked by: Dan

0

Expert Reply:

I would be happy to make a recommendation for your 2020 Subaru Outback Wagon. Both the etrailer item # e25TR and the Draw-Tite Hitch Receiver item # DT74YR have identical capacities and installation methods. I have linked installation and review videos below. The Draw-Tite receiver hangs down lower than the etrailer and is more expensive. Both of these reasons are why I would recommend the etrailer item # e25TR for your Outback.

If you need a wiring harness to control your trailer's lighting functions you will want the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118467. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located in your rear cargo area.

To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and 2" drop. It also includes a hitch pin and clip, hitch receiver lock with keys, hitch cover, and a storage case.

expert reply by: Jerred H

0

Answer 1

There are a few differences between the Universal Installation Kit part #ETBC7 and the 7-Way RV Upgrade Kit part #ETBC7L. The biggest one is that part #ETBC7 comes with both the power and brake output wire you will need to run to the cab/battery…

view full answer...

Answer 2

It most likely will but Draw-Tite hasn't confirmed any of their hitches fit 2024 vehicles. Draw-Tite's parent company was bought out earlier this year so as of (09-09-23) they haven't updated any of their hitches for the 2024…

view full answer...

Answer 3

The etrailer Trailer Hitch Receiver part #e25TR which is a fit for a 2020 Subaru Outback Wagon does not come with fishwire but we do offer the Curt Fish Wire Bolt Leader part #C58410 which will assist you with your installation. I have attached an…

view full answer...

Answer 4

I have a great hitch that will fit your 2022 Subaru Outback Wilderness but the Draw-Tite one you referenced is no longer available. Draw-Tite's parent company is being bought out and their parts are perpetually back ordered so they're…

view full answer...

Answer 5

I recommend using the etrailer Trailer Hitch Receiver #e25TR on your 2023 Subaru Outback. This receiver has a matte black finish and hidden cross tube providing for what I feel is the best looking receiver. The T-One Vehicle Wiring Harness #118467…

view full answer...

Answer 6

For a hitch that will let you experience towing a trailer with your 2022 Subaru Outback Premium I recommend the etrailer Trailer Hitch Receiver #e25TR. This is a Class III hitch with a 2" receiver and a concealed cross tube. It has a…

view full answer...

Answer 7

The rating of a trailer hitch receiver and the vehicle it was designed for rarely match up perfectly. In most cases including this one, Draw-Tite tested the hitch to higher standards and found the #DT73RR capable of the 675lb tongue weight and 4500lb…

view full answer...

Answer 8

For installing a hitch on your 2022 Subaru Outback, most of the hitches we carry do require for you to remove your rear bumper during installation. If you are looking to avoid that step, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver -…

view full answer...

Answer 9

I am not aware of any legally mandated minimum ground clearance requirement for trailer hitch receivers in any states and my online research did not reveal any such laws. However, I did find on an internet forum for Sienna owners posts related to…

view full answer...

Answer 10

There is a hitch with a removable receiver that fits your 2023 Subaru Outback Touring, though not the one you referenced. Instead, what you will need is one from Draw-Tite: - Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT74YR The #DT74YR has a…

view full answer...

Answer 11

I do have an option for you Trevor but there is not a custom fit 7-Way harness available for the 2020 Subaru Outback Wagon. You will need to convert Tekonsha 4-Pole flat trailer connector part #118467 to a 7-way connector with part #ETBC7. The…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...