Availability of Tinted Lid Version of MaxxFan Deluxe RV Roof Vent

Question

Question:

Hi there, Question about the MaxxFan Deluxe. Shocker, Aye? - Haha. I would like to get the fan with the transparent lit, not the darker black tint or white. I see it available sparingly on the internet. Mostly available overseas.. Is there a reason we cant get this color cover in the US? Thanks for your time!

asked by: Taylor S

0

Expert Reply:

We have the smoked transparent lid version of the MaxxFan Deluxe RV roof vent with fan available with the part # MA00-06200K that you are wanting. We also have the replacement lid too with part # MA05-30520.

expert reply by: Jameson C

0

Answer 1

The #MA10A40002K is only designed to fit on a MaxxFan or MaxxFan Plus Model so you would instead need the Replacement Rain Shield for MaxxFan Deluxe Roof Vent - Smoke #MA05-30520 or #MA05-30510 (white) to replace your MaxxFan Deluxe lid. If you also…

view full answer...

Answer 2

There are not specific instructions on how to replace the Replacement Rain Shield for MaxxFan Deluxe Roof Vent - Smoke part #MA05-30520 on the MaxxFan Deluxe Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke part #MA00-06401K. However, replacement…

view full answer...

Answer 3

Yes, I can confirm that when removing the vent hinge screws you will then be able to open the lid to gain access to the remaining hinge screws when installing the Replacement Lid for MaxxAir MaxxFan Deluxe #MA05-30510.

view full answer...

Answer 4

To access the screws needed to remove the vent lid of your MaxxFan to install the new #MA05-30520 you would need to raise the lid so that you can unscrew it from the base of the vent assembly. The screws are not accessible without having the lid up.

view full answer...

Answer 5

The Replacement Lid for MaxxAir MaxxFan Deluxe #MA05-30510 would be a compatible replacement for your MaxxFan Deluxe Roof Vent #MA00-07000K. If you would prefer the cover to be smoke colored then you would want part #MA05-30520. If you need to…

view full answer...

Answer 6

The Replacement Lid for MaxxAir MaxxFans #MA05-30510 is made of opaque white plastic (not clear plastic). The MaxxFan Deluxe Roof Vent #MA00-05301K that this part fits is a powered vent with a fan/motor assembly. Since that part of the vent would…

view full answer...

Answer 7

Yes we have smoke colored RV roof vent lids. Can you get me the brand and more info on your roof vent? With that I can see what you'd need.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...