Confirming You Can Open Lid When Replacing it on MaxxFan Deluxe to Gain Access to Screws

Question

Question:

PLEASE CONFIRM: Regarding: QA: How To Install The Replacement Lid for MaxxAir MaxxFan Deluxe. There are 8 screws holding lid. Two on the rear vent hinge easily accessible with lid open, and 6 or 7 on the front side hinge Not accessible unless... My assumption is that if I remove the Two rear vent hinge screws, I will then be able to lift/open the Lid towards to front to gain access to the remain 6-7 front hinge screws. Please confirm this to be true. Thank-you

asked by: Tom L

0

Expert Reply:

Yes, I can confirm that when removing the vent hinge screws you will then be able to open the lid to gain access to the remaining hinge screws when installing the Replacement Lid for MaxxAir MaxxFan Deluxe # MA05-30510.

expert reply by: Kyle S

0

Answer 1

To access the screws needed to remove the vent lid of your MaxxFan to install the new #MA05-30520 you would need to raise the lid so that you can unscrew it from the base of the vent assembly. The screws are not accessible without having the lid up.

view full answer...

Answer 2

There are not specific instructions on how to replace the Replacement Rain Shield for MaxxFan Deluxe Roof Vent - Smoke part #MA05-30520 on the MaxxFan Deluxe Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke part #MA00-06401K. However, replacement…

view full answer...

Answer 3

It is possible for the Circuit Board for MaxxAir Powered Lift RV Roof Vents #MA10A21275K to fail in any amount of time. There are several factors that may have caused the fan to fail in that timeframe. These electronic boards are sensitive to power…

view full answer...

Answer 4

The replacement printed circuit board for your MaxxFan Delux Item #MA00-07500K is Item #MA10A21275K.

view full answer...

Answer 5

We have the smoked transparent lid version of the MaxxFan Deluxe RV roof vent with fan available with the part #MA00-06200K that you are wanting. We also have the replacement lid too with part #MA05-30520.

view full answer...

Answer 6

The Replacement Lid for MaxxAir MaxxFan Deluxe #MA05-30510 would be a compatible replacement for your MaxxFan Deluxe Roof Vent #MA00-07000K. If you would prefer the cover to be smoke colored then you would want part #MA05-30520. If you need to…

view full answer...

Answer 7

To install a roof vent lid like the Replacement Lid for MaxxAir MaxxFan Deluxe #MA05-30510 for the MaxxFan Deluxe Roof Vent w/ 12V Fan #MA00-05301K, isn't considered to be a difficult task at all. The unit does not have to be removed from the…

view full answer...

Answer 8

The correct replacement circuit board for your MaxxAir Deluxe 7500K vent fan assembly is indeed the #MA10A21275K you'd looked at. If you click the provided link, you can see a product description video featuring the replacement circuit board.

view full answer...

Answer 9

It sounds like your Printed Circuit Board #MA10A21275K may be damaged. While this does replace on most of the MaxxAir Deluxe model fans you will need to verify your model and the date of manufacture of your fan to ensure proper compatibility. To…

view full answer...

Answer 10

The #MA10A40002K is only designed to fit on a MaxxFan or MaxxFan Plus Model so you would instead need the Replacement Rain Shield for MaxxFan Deluxe Roof Vent - Smoke #MA05-30520 or #MA05-30510 (white) to replace your MaxxFan Deluxe lid. If you also…

view full answer...

Answer 11

Yes we have smoke colored RV roof vent lids. Can you get me the brand and more info on your roof vent? With that I can see what you'd need.

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...