Do The Marlboro Continuous Hinges Come With Pre-Drilled Mounting Holes

Question

Question:

I was looking at your 6 wide continuous hinge 1/2 pin diameter but in your picture I didnt see any holes for the screws or I have drill my own holes.

asked by: Mr.johnson

0

Expert Reply:

The 6" Wide Continuous Hinge - 8' Long - 1/2" Pin Diameter # MA32VR you referenced along with all other Marlboro Continuous hinges do not come with pre-drilled holes because they want to provide a universal fit hinge so you will need to drill your own holes.

expert reply by: Kevin C

0

Answer 1

Hinges like the 6" Wide Continuous Hinge - 6' Long - 1/2" Pin Diameter - Steel #MA52VR do not have weight capacity ratings and it is up to the installer to determine if it will be strong enough. We do have a longer 8 foot…

view full answer...

Answer 2

I do have a solution for you as when I reached out to Marlboro Manufacturing who produces these piano hinges. They do not have any weight capacity ratings for their piano style hinges that you are looking at. They do offer their Weld-On Hinge with…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

To properly measure your leaf springs you'll want to lift the trailer by the frame to take the weight off of the suspension and then measure from the center of the eyelet straight across the spring to the end of the slipper (pictured below).…

view full answer...

Answer 5

Thank you for the pictures! I may have an option for you, but none of the hinges we offer have mounting brackets that are 5" tall.. The most likely option we have is the #PLR4040 which opens 270 degrees. The mounting bracket on the #PLR4040…

view full answer...

Answer 6

Installing the Hinges on your Side-Door Bar Lock Assembly, item #305736, is pretty much up to you and the construction of your trailer. You will need to purchase appropriate hardware to install the Side-Door Bar Lock that you purchased. It is best if…

view full answer...

Answer 7

With how long your current springs are, you will have replace the hangers for the springs to attach to. That being said, this does happen sometimes and it is not the end of the world. The 6-Leaf Double Eye Spring #e27SR will have a length of 26…

view full answer...

Answer 8

Trailer ramp spring #362SW61 could work provided that the interior of the trailer is wide enough for the rod (the rod can be trimmed down as low as 48 inches). The capacity of this spring is 120 pounds so it will help when both raising and lowering…

view full answer...

Answer 9

The Everchill Wine Cooler #324-000115 is more or less a standard wine cooler but it was made with the tighter space limitations that RVs have in mind as well as has a bit of a stronger magnet in the door which helps keep it closed.

view full answer...

Answer 10

I took a look at what we have, and the closest I was able to find to what you need is the: -3" Wide Continuous Hinge #PLR843. This is a continuous hinge that measures 7' (84") long, and is 3"wide. Consequently, we also carry the:…

view full answer...

Do The Marlboro Continuous Hinges Come With Pre-Drilled Mounting Holes

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching