Parts Needed To Use 15K BTU Advent Air RV Air Conditioner Overhead Unit

Question

Question:

Just buy new system ACM150 new a/c only has 1 connector and old 2

asked by: Emilio

1

Helpful Expert Reply:

The Advent Air RV Air Conditioner part # ACM150 is just an overhead unit. It's designed to be used with an Advent Air Distribution Box like part # ACRG15. That said, it can be used with other brands of distribution boxes but you'll need an adapter for this which will be specific to the exact brand and model you have. For example, if you have a Coleman Mach RV Air Conditioner then you will need part # ACCOLKIT or if you have a Carrier RV Air Conditioner you will need part # ACCARKIT.

expert reply by: Conner L

1

Answer 1

The only way to know if you have a Carrier or Dometic air conditioner is by looking at your air conditioner, which can certainly be a pain as it's on top of your trailer, but that's the only way to tell what you have. That said, the Advent…

view full answer...

Answer 2

Great question. We do have the Advent Air Rooftop RV Air Conditioner #ACM150 with the interior components. It is part #ACM150C and it also includes the start capacitor. That capacitor is extremely helpful in making sure you can start your AC even…

view full answer...

Answer 3

That will depend if you Dometic Duo Therm Brisk Air uses a 6 pin or 9 pin connector to go between the roof top unit and the control box. You'll need to remove the plenum to access your control box, and look for the wire that plugs into the roof…

view full answer...

Answer 4

The Advent Air RV Air Conditioner #ACM150 is a 15,000 BTU air conditioning unit that is a direct plug and play replacement for your Dometic Duo-Therm 630515.321 and you can add the Electric Heat Strip for Advent Air RV Air Conditioners - 5,500 BTU…

view full answer...

Answer 5

For your Dometic air distribution box, you will wan to use the Advent Air Replacement RV Air Conditioner for Dometic Setup w/ Start Capacitor - 15,000 Btu - White #ACDOM150. This will work well for your system.

view full answer...

Answer 6

To use the Advent Air Air Conditioner for Dometic setups part #ACDOM150 with the older CCC thermostat you'd need to also get the CCC to CCC2 adapter from Dometic which we don't carry. This part number would be 3313107-107

view full answer...

Answer 7

The Advent Air RV Air Conditioner - 15,000 Btu - White #ACM150 is designed to just replace the outside part of the AC system and utilize the old system components like the air distribution box, ducts, and thermostat. It is directly compatible with…

view full answer...

Answer 8

Currently the only wall mounted thermostat replacement for an Advent Air RV Air Conditioner #ACM150 comes bundled with an upgraded air distribution box #ACRG15. Air distribution box for ducted or ductless systems lets you replace or upgrade an…

view full answer...

Answer 9

Nope, all you may need is the 6-to-9 pin adapter #ACCOLKIT if you find your current Dometic Dup Therm uses a 9 pin connrector. The Advent #ACM150 will work with your existing plenum and thermostat, as you're just replacing the roof top unit and…

view full answer...

Answer 10

Furrion offers an adapter that can be used with their Chill AC units like the #FR86PR that was designed for them to replace a Dometic unit with the part #C-FACR15SA-A01. This would be a great option that is quieter and we have found blows the coldest…

view full answer...

Answer 11

In my opinion I would go with the Advent Air RV Air Conditioner - 15,000 Btu Item #ACM150 to replace your existing Dometic AC unit. The Advent allows you to use your existing air distribution box where the Furrion would require all new parts. That…

view full answer...

Answer 12

Since you have a Dometic setup current the Advent Air AC unit you would want is the part #ACDOM150 which was designed to connect directly to Dometic wiring like you have for an easy install.

view full answer...