Fan-Tastic Fan Model 5300 Does Not Operate With Wall Controller

Question

Question:

Model 5300 work manually when I turn the handle on the Fan. However it doesn’t work by the controller. Motherboard??

asked by: David

0

Expert Reply:

It sounds like your wall mounted controller is no longer working, and the correct course of action would be to replace the controller, however the 5300 model is no longer available, and neither are their parts.

If you're interested, the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-07500K will work as a great replacement upgrade.

This fan has a simple 2 wire design, a remote with LCD screen that will allow you to set the thermostat, and control the fan speed and direction, and the storage cradle for the remote is able to be mounted to the wall.

expert reply by: Bryce D

0

Answer 1

Thanks for reaching out! Since you have the 4951KS model MaxxFan roof vent you'll need the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. The circuit board might look slightly different as far as the pieces…

view full answer...

Answer 2

I got you covered, the correct replacement circuit board for your MaxxFan 4751KS you'll want the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS.

view full answer...

Answer 3

Based on the issue you are having, Yes. A bad circuit board can cause all kinds of weird issues like your fan running all the time and the vent lid not opening. Since you have the MaxxAir 4751KS you will need the replacement circuit board…

view full answer...

Answer 4

It sounds to me like your control board on your MaxxAir Fan Model 4751KS. The correct control board replacement for your unit is the Replacement Printed Circuit Board for MaxxAir Manual Lift RV Roof Vents #MA10A21276K.

view full answer...

Answer 5

The only black exterior ladder we offer at this time is the Stromberg Carlson RV Exterior Ladder part #LA-401BA which is 99-1/2" tall but can be trimmed down if needed. When replacing the exterior ladder that you have now you will want to…

view full answer...

Answer 6

The Replacement Control Panel Kit with Touchpad #LC34UJ is the correct part to replace your Power Gear control panel on your 1999 American Tradition motorhome.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The model number for fans such as the MaxxAir MaxxFan Mini Roof Vent, #MA00-04401M is listed on the upper side of the assembly itself. Please see the attached image. You will best identify this by opening the vent and climbing on top of the RV.…

view full answer...

Answer 11

The Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR is a single zone 3 wire thermostat like the one you are describing. I have attached the wiring diagram for this thermostat and the control box below for your reference.

view full answer...

Answer 12

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...