Replacement Circuit Board for a MaxxFan 4751KS On A 2017 Keystone Montana

Question

Question:

I have a 2017 keystone Montana 3160 RL with a max air max fan vent with rain sensor. I looked for the model numbers as described in your question answer section and they have been lost. I do need a new circuit board and it is a triangular board With numbers 4751K_board_U1.4. The fan is exhaust only.

asked by: Monty S

0

Expert Reply:

I got you covered, the correct replacement circuit board for your MaxxFan 4751KS you'll want the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents # MA10A04751KS.

expert reply by: Bryce D

0

Circuit Board for MaxxFan 4751KS
(click to enlarge)

Answer 1

Thanks for reaching out! Since you have the 4951KS model MaxxFan roof vent you'll need the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. The circuit board might look slightly different as far as the…

view full answer...

Answer 2

Thank you for including the model number of your fan, 04751KS, which was exactly what was needed to find your replacement circuit board. The correct part for your MaxxAir MaxxFan Plus Roof Vent 4751KS is: - Replacement Printed Circuit Board for…

view full answer...

Answer 3

The correct replacement for your MaxxAir Circuit Board 10-04751ks is the following part: - Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS As for the sensor wires, so long other wires are not damaged, I…

view full answer...

Answer 4

Based on the issue you are having, Yes. A bad circuit board can cause all kinds of weird issues like your fan running all the time and the vent lid not opening. Since you have the MaxxAir 4751KS you will need the replacement circuit board…

view full answer...

Answer 5

It sounds to me like your control board on your MaxxAir Fan Model 4751KS. The correct control board replacement for your unit is the Replacement Printed Circuit Board for MaxxAir Manual Lift RV Roof Vents #MA10A21276K.

view full answer...

Answer 6

You can use the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS to replace your damaged 10A04751ksz MaxxAir circuit board. This is a direct replacement.

view full answer...

Answer 7

For a replacement circuit board you can use the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. We have confirmed with MaxxAir that this is the correct for what you have.

view full answer...

Answer 8

I reached out to my contact at MaxxAir and she said that the correct printed circuit board for your MaxxAir model 4751KSV05 powered vent fan is the part #MA10A04751KS.

view full answer...

Answer 9

This definitely sounds like the circuit board, so you'll want to use the Replacement Printed Circuit Board #MA10A04751KS which is designed to work with models 4751KS, 4761KS, and 4951KS. I know some other customers have been apprehensive…

view full answer...

Answer 10

The model number for fans such as the MaxxAir MaxxFan Mini Roof Vent, #MA00-04401M is listed on the upper side of the assembly itself. Please see the attached image. You will best identify this by opening the vent and climbing on top of the RV.…

view full answer...

Answer 11

Yes you are correct the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is the right replacement and measures 18 1/8" long and 16 1/2" wide, which is the same measurements as your current MaxxFan Plus Roof Vent w/…

view full answer...

Answer 12

Your MaxxFan Plus Roof Vent w/ 12V Fan and Thermostat - Manual Lift - 10 Speed - White #MA00-04000K could be cutting off after 10 seconds for the following reasons: 1. Insufficient or fluctuating power. Your fan could be receiving less than 12v of…

view full answer...

Replacement Circuit Board for a MaxxFan 4751KS On A 2017 Keystone Montana

Product Page this Question was Asked From

Continue Researching