Mounting Hole Locations on Back Plate of etrailer Trailer Hitch Receiver # e98852

Question

Question:

Hello, Could you provide the measurement specs from hole to hole n the back plate on this item? etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" Item # e98852 I am trying to assess if it will match my john deer lawn mower existing mount bracket. Thank you.

asked by: Chris

0

Expert Reply:

The etrailer Trailer Hitch Receiver # e98852 measures 7-3/4" from center of hole to center of hole on the back plate. The holes are 1-1/2" to the center of the hole from the top of the receiver on the back plate(see image).

expert reply by: Bud M

0

Mounting Hole Locations on Back Plate of etrailer Trailer Hitch Receiver # e98852
(click to enlarge)

Answer 1

In order to tow a trailer with a 2019 Ram 1500 Classic you'll need a trailer hitch, trailer wiring harness, and ball mount/hitch ball. For a trailer hitch, I recommend the etrailer Trailer Hitch Receiver part #e98852 which offers an easy…

view full answer...

Answer 2

The etrailer Trailer Hitch Receiver #e98852 is a fit for your 2019 Ram 1500 Classic, so you do have the right hitch for your truck. It is rare that the bumper cap can't go back on easily, but the space between the cap and your bumper is…

view full answer...

Answer 3

Sounds like you are looking for a trailer hitch that fits your 2021 Ram 1500 Classic Tradesman which we have options for that like with the etrailer hitch part #e98852 which would work great. There is no fit exclusion for this hitch for the Tradesman…

view full answer...

Answer 4

To order replacement hardware for the etrailer Trailer Hitch Receiver #e98852 you just need the part #RHK. Just fill out the box and select etrailer in the drop down menu and we will send you all of the hardware that comes with the kit, including the…

view full answer...

Answer 5

I'm not sure I completely understand what you're referring to, so I apologize in advance for any misunderstanding, but are you referring to the ball mount hole on the bumper in front of the license plate? If so, that is not meant for any…

view full answer...

Answer 6

The Replacement 42" Cable for Breakaway Switch from Bright Way Group, #3802350, will fit most models of ESCO break away switches. If you don't want to take a chance on it not fitting, I would instead recommend replacing the switch with part…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Mounting Hole Locations on Back Plate of etrailer Trailer Hitch Receiver # e98852

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching