Replacement Cable And Switch Compatible With ESCO Breakaway Switch

Question

Question:

I need a few spare breakaway cables and plugs for an ESCO break away switch. I do not see one on your site. thanks

asked by: Paul M

0

Expert Reply:

The Replacement 42" Cable for Breakaway Switch from Bright Way Group, # 3802350, will fit most models of ESCO break away switches. If you don't want to take a chance on it not fitting, I would instead recommend replacing the switch with part # 3802348 which is universal so it will fit for sure.

expert reply by: Jason S

0

Answer 1

I believe you are looking for the correct nut to fit the stud part #007-112-00 which would be the #38N.

view full answer...

Answer 2

You likely can use any replacement switch since all they do is complete a circuit when the pin is pulled out. One wire on the switch should be connected to the positive battery terminal on the trailer. The other will tee into the wiring leading…

view full answer...

Answer 3

We don't have the specific pin, but I have a solution for you. Since Breakaway Switches are universal, I recommend you replace the entire switch with part #3802348 to go with your ESCO breakaway systems.

view full answer...

Answer 4

The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all…

view full answer...

Answer 5

You can certainly add a 7-way trailer connector to your trailer with 6 wires. You would simply have 1 pin on the 7-way connector that did not function. I recommend adding a 7-way molded trailer wire connector like part #H20046, and a junction box…

view full answer...

Answer 6

The Replacement 42" Cable for Breakaway Switch #3802350 is compatible with your certain models of Bright Way breakaway switches. If you only need the cable, this will work for sure. The pin is intended for models 2307, 2308, 2326, 2336,…

view full answer...

Answer 7

The Greystone Built-in Microwave with Trim Kit #324-000105 that you referenced will work great to replace your 22 inch Magic Chef microwave. The flange dimensions of this are 23-3/8 inches wide and 15 inches tall so it will cover your opening and…

view full answer...

Answer 8

The configuration of the breakaway pin can vary from manufacturer to manufacturer, and between models of breakaway switches. When you pull the old pin to replace it with the new one, the brakes will indeed apply, but they should let loose when you…

view full answer...

Answer 9

Thanks for the photo! Based on that I can tell you that you were right on - the Replacement Cable and Pin Assembly #3802350 will work for you as this is the same pin style as yours. I have added a link to a video review for you to check out as well.

view full answer...

Answer 10

For your Dometic Duo Therm PDX 57915.622 we have the replacement shroud part #DMC69FR as a confirmed fit. The color will be more of an off-white than the white of your old shroud but this will still fit and work great.

view full answer...

Answer 11

All of the fans and fan motors that we offer are replacement items for roof vents that came with fans. If the roof vent in your trailer did not come with a fan, then you may be able to add a fan, but you will likely have to fabricate a mount for…

view full answer...

Answer 12

If your breakaway battery is dead, your brakes should operate while connected to your vehicle's 7-way trailer connector. If your brakes are not operating, then it sounds like you might have a short in the brake wiring of the trailer.…

view full answer...