Curt Trailer Hitch Installation - 2019 Ram 1500 Classic 13333 Video

I just confirmed with Curt, if your 2021 Ram Warlock has the class 3 towing bumper than the Curt hitch receiver item #C13419 is the correct receiver for your truck. The Curt hitch receiver mounts to the factory bumper bar that acts as the crossbeam.…

There are two different trailer hitches for your 2019 Ram 1500 that came from the factory. There is one that has a 2" receiver tube opening below the bumper and one that has a cutout for a hitch ball in the bumper. It looks like you have the…

The easiest to install trailer hitch for your 2020 Ram 1500 is the Curt hitch part #C13419 which basically just bolts to the rear bumper beam. I attached a picture of what it looks like installed as well as an install video for you to check out too.

The etrailer Trailer Hitch Receiver #e98852 measures 7-3/4" from center of hole to center of hole on the back plate. The holes are 1-1/2" to the center of the hole from the top of the receiver on the back plate(see image).

The Class III OEM bumper mounted hitches for your 2022 Ram 1500 have a similar design to the Curt Trailer Hitch Receiver #C13419 which is a simple 3-bolt installation that attaches to the bumper. It looks really clean but the bumper isn't a…

Yes, you can remove the OEM Class IV receiver from your 2013 Ram 1500. If it is just bolted on then you should be able to do it yourself, but you might have to move a few other things under your Ram depending on how the hitch installs. If it is…

Since the max trailer rating of your 2011 Ram 1500 is 7,600 lbs and the GVWR (gross vehicle weight rating) of your trailer is 7,000 lbs that means with your trailer loaded to max capacity you will still have 600 lbs of capacity on your pickup. This…

It seems like some owners can put the cap back on and others cannot after installing Curt trailer hitch #13333. It is possible that on your truck, and others affected, the hitch is pulled up tighter to the bumper causing the cap not to fit back on.…

Congrats on your new truck! According to the installation instructions of the Draw-Tite Class 5 Trailer Hitch Receiver #41913, you do not need to cut your factory hitch off as it is bolted on, not welded, as shown in step 3 (see photo). I have also…

I spoke with my contact at Curt about your 2014 Dodge Ram 1500. They said it would depend on how you are planning on using the hitch you choose. If you are planning on towing something that would require a weight distribution system when towing, you…

The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…

Great question Betty! The 2020 Chevy Colorado can be flat towed with all 4 wheels on the ground as long as the truck has a neutral and four wheel drive low setting. Before flat towing, apply the parking brake, start the engine, shift the transfer…