Recommended Trailer Hitch for 1993 Chevrolet K3500 Pickup with Deep Drop Bumper

Question

Question:

Hello I have a Chevy K 3500 I’m trying to find the correct hitch for it the frame measures 34 inches from the outside of the frame to the other side the dimensions for the mounting holes 30 inches and 3/4 The needs to be at least 5 1/2 inches to clear the bumper can you suggest a hitch that will meet this application? Thanks

asked by: Carlos S

0

Expert Reply:

The Curt Trailer Hitch Receiver part # C13099 is a confirmed fit for a 1993 Chevrolet K3500 Pickup and it is designed for models with a deep drop bumper so it will work great for you. It offers a 5,000 lb weight capacity with standard 2" receiver. It does require drilling for installation.

expert reply by: Conner L

0

Answer 1

For your 1999 Chevy C/K Series pickup truck with 10" deepdrop bumper you can use the Curt #C13099 with 5000 pound towing capacity, or if you need something beefier you could use the Curt #C15317 with 16,000 pound towing capacity. Both are…

view full answer...

Answer 2

If the rear most attachment points on the frame of your 1992 Chevy C/K truck do not have the weldnuts in the frame then they could have broken off or corroded away. It should be a C-channel frame so it would be easy to see if it is obvious that a…

view full answer...

Answer 3

Outstanding photos thank you so much for sending them, and based on that we do have a hitch that can fit your 1965 Ford F-250 with a custom bumper. Since the frame is clear from any interference with the bumper, all you need to do is measure from…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

I have included a picture of what a deep drop bumper is going to look like for you. If your bumper looks more like the standard bumper, pictured in the FAQ I have linked for you, then you do not have the 10 inch bumper. You would then need a…

view full answer...

Answer 6

I reached out to my contact at Curt and he said for your 1996 Ford F-150 the Curt Trailer Hitch Receiver #C13902 would require some pretty significant modifications on the truck for installation. Even when considering that the actual custom-fit…

view full answer...

Answer 7

A roll pan bumper is a bumper that basically makes the rear bumper look as if it does not stick out further than the rest of the truck and that is molded into the rear of the truck. Its basically a cosmetic modification that you see on a lot of…

view full answer...

Answer 8

The Curt 3-Piece Trailer Hitch Receiver #C15511 will fit a 1989 Chevy K1500 if it's the cab and chassis model. Since you have a pickup we need to find a different hitch. If your Chevy has the standard or step bumper then I recommend checking out…

view full answer...

Answer 9

The main difference between Draw-Tite trailer hitches #75033 and #75099 is the placement of the receiver tube on the cross member. On 75033 the receiver is attached to the rear part of the cross member. On 75099 it is welded below the cross member so…

view full answer...

Answer 10

I spoke with my contact at Curt about hitch #C13902. The overall width is approximately 41-1/2 inches. The bolt holes are approximately 39-1/2 inches apart on center.

view full answer...

Answer 11

I reached out to my contact at Curt and was able to get a dimension sheet for the Curt Trailer Hitch Receiver - Class V #C15810 referenced in your question. I have attached an image of it for your review. This trailer hitch is designed to fit select…

view full answer...

Answer 12

The Draw Tite hitch part #41524 is a confirmed fit for a replacement for your 1995 Chevy K1500 pick up truck.

view full answer...

Recommended Trailer Hitch for 1993 Chevrolet K3500 Pickup with Deep Drop Bumper

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching