How to Order Trailer Valet RVR3 with 2 inch Hitch Ball

Question

Question:

Will the Trailer Valet RVR3 accommodate a 2” ball so I can move the unit from trailer to trailer easily? Looks like the part # is TVRVRBB20. Is my assumption that the unit RVR3 is prepared to handle a 2” ball directly, and if yes, is the part # accurate?

asked by: Jeff K

0

Expert Reply:

In order to obtain a 2" hitch ball for the Trailer Valet RVR3 Remote-Controlled Trailer Dolly part # TVRVR3-BB225 which comes with a 2-5/16" hitch ball you simply need the Replacement 2" Hitch Ball for Trailer Valet part # TVHB2. There isn't a way to order it with just the 2 inch hitch ball.

expert reply by: Jameson C

0

Answer 1

The Trailer Valet RVR3 Remote-Controlled Trailer Dolly - Wireless Remote - 3,500 lbs #TVRVR3 you referenced has a tongue weight capacity of 350 lbs max. The mounting bracket with attach directly to your trailer tongue and has a quick release cotter…

view full answer...

Answer 2

Since the ball mount version of the Trailer Valet RVR3 part #TVRVR3-BB225 attaches to the center of the trailer it's going to be easier to move the trailer in reverse since the frame mounts will be off to one side a little bit which will make…

view full answer...

Answer 3

Yes, the Trailer Valet Combo Ball Tower Mount for RVR Trailer Dolly - 2-5/16" Hitch Ball, part #RVRBB225, can be used with a 1-7/8" ball mount. However, per the rep at Trailer Valet, the 1-7/8" ball mount is not compatible…

view full answer...

Answer 4

Yes, the Trailer Valet RVR3 Remote-Controlled Trailer Dolly w/ Hitch Ball Mount - Wireless Remote - 3,500 lbs, part #TVRVR3-BB225, comes with the 2-5/16" hitch ball and mount. We do sell each of these items, the RVR3 Trailer Dolly and the…

view full answer...

Answer 5

When the ball tower is installed, the total height of the #TVRVR3-BB225 will be 18 inches. This will be pretty much exactly the same as when the frame bracket attachment as well.

view full answer...

Answer 6

When it comes to The Trailer Valet RVR3 Remote-Controlled Trailer Dolly w/ Hitch Ball Mount - Wireless Remote - 3,500 lbs #TVRVR3-BB225 it comes with the 2-5/16 inch ball. Per the manufacturer The Replacement 2 inch Hitch Ball for Trailer Valet XL…

view full answer...

Answer 7

There are 3 different battery chargers for the Trailer Valet remote controlled dollies and the correct one just depends on the weight rating of your dolly: 3,500 lbs - #TV77FR 5,500 lbs - #TV87FR 9,000 lbs - #TV27FR Once you know the weight rating…

view full answer...

Answer 8

The Trailer Valet RVR3 Remote-Controlled Trailer Dolly w/ Hitch Ball Mount - Wireless Remote - 3,500 lbs #TVRVR3-BB225 will work with just about any trailer. It comes with a 2-5/16" ball, but can also attach most trailer frames as well.

view full answer...

Answer 9

If your trailer is 5,000 when you are wanting to move it then you can use the Trailer Valet RVR5 Remote-Controlled Trailer Dolly #TVRVR5 which is rated for 5,500 lbs. If you are wanting to move your trailer and that weight exceeds the 5,500 lb mark…

view full answer...

Answer 10

The Trailer Valet RVR3 - Remote-Controlled Trailer Mover #TVRVR3 that you referenced weighs a total of 45 lbs and and has a trailer weight capacity of 3,500 lbs. The higher rated #TVRVR5 weighs 99 lbs and has a 5,500 lb trailer weight capacity.

view full answer...

Answer 11

Yes both of the Trailer Valet Remote-Controlled Trailer Dollies #TVRVR5 and #TVRVR3 have internal brakes that are automatic. What this means is that unless you are intentionally moving them they will not move or roll. The 5 is just as ball mount…

view full answer...

Answer 12

A brake controller is used while towing a trailer, not while you're jockeying it around into a parking spot or grarage. Newer Airstream travel trailers would be equipped with electric brakes, so you wouldn't have a surge brake coupler…

view full answer...