7-Way Trailer Wiring Harness that Fits 2019 Acura MDX

Question

Question:

I have a boat that has a 7 pin connection. Do you have one that I can purchase as I only see 4 pin. Thanks,

asked by: Bernie D

0

Expert Reply:

We do have a 7-way trailer wiring connector kit that fits your 2019 Acura MDX with the part # 118289 which is custom fit.

expert reply by: Jameson C

0

Answer 1

In order to control the brakes on your trailer, you will need a brake controller. Since you're going to be installing the Tekonsha #118289 on your 2015 Acura MDX, you don't already have the towing package in place, which would mean that…

view full answer...

Answer 2

Yes, the Tekonsha Vehicle Wiring Harness with 7-Way Trailer Connector #118289 will include the backup/reverse lights. You will not need to splice any wires on your 2020 Acura MDX for this connection. You will also want a Mounting Bracket #PK12711U…

view full answer...

Answer 3

Yes the 12 volt accessory circuit of a 7-way trailer wiring connector can keep a trailer house's battery topped off. Basically you'd run 10 gauge wire like part #10-1-1 to the battery's positive battery post and you'd be set.

view full answer...

Answer 4

The T-One Vehicle Wiring Harness #118628 you referenced for your 2019 Acura MDX only carries the running lights and turn/brake light functions but we do have a way for you to add the reverse light function as well. Since all 4-Way wiring harnesses…

view full answer...

Answer 5

A factory 7-way trailer connector isn't all you need to power a trailer's electric brakes. You still need a brake controller. Some Ford F-150s are equipped with a factory integrated brake controller, which you may have. If your 2012 Ford…

view full answer...

Answer 6

I pulled one of the #37185 wiring harness kits from our warehouse and measured the mounting bracket holes. I have attached a photo of the bracket with the dimensions noted. The distance between the mounting holes is 2.25 inches. I have attached a…

view full answer...

Answer 7

Most likely you had some corrosion or dirt in the threads of the weldnuts of your 2015 Acura MDX which was causing the bolts to not be able to thread all the way in. This is a pretty common issue which affects the install of trailer hitch hardware. I…

view full answer...

Answer 8

No, you will not need to remove the hitch to install the T-One Vehicle Wiring Harness with 7-Way Trailer Connector #118289. This is going to be a really simple, plug and play process so you've got nothing to worry about. You may want to consider…

view full answer...

Answer 9

The Tekonsha T-One Vehicle Wiring Harness with 7-Way Trailer Connector #118289 is confirmed to fit your 2017 Acura MDX. This fits all models so it is not a matter of your vehicle not being supported. You are correct, you won't get anything on the…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

While you are correct that a wide variety of trailer wiring harnesses do require the installation of a relay, this is not the case for your 2020 Acura MDX. I recommend going with one of our Tekonsha wiring kits because we have found that their…

view full answer...

7-Way Trailer Wiring Harness that Fits 2019 Acura MDX

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching