etrailer.com Trailer Hitch Installation - 2019 Acura MDX Video

For your 2018 Acura MDX the aftermarket trailer hitch that will be most similar to the OEM/factory unit is the etrailer.com Class III Hitch #e98840. The primary difference between the OEM hitch for the Acura MDX and an aftermarket model is their…

The best hitch solution we offer for your 2019 Acura MDX is the etrailer hitch part #E98840 as it has plenty of capacity for your bike rack, is the least visible option, and has a very easy install. I attached a picture of it installed as well as an…

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

We do have hitches that fit the 2019 Acura MDX but the full size spare tire does need to be removed. The P245/50R20 wheel has a 20 inch diameter and all of the hitches available for your vehicle only install with 18 inch or smaller wheel. I recommend…

It would depend on which hitch manufacturer you're asking about. Hidden Hitch and Draw-Tite Hitches are manufactured in Mexico by Cequent Performance products. They've been around a long time, they make a quality product and they do an…

According to Curt, their #C13146 is a fit for all models on the 2020 Acura MDX, including your Sport Hybrid. When installed, the crossbar of this hitch will be fully concealed behind the bumper with the only visible portion of the hitch being the…

Trailer hitch #e98840 fits all models of the 2018 Acura MDX, including the hybrid, but for models with the full size spare tire it will not fit unless the spare is stored elsewhere. The etrailer #e98840 is also confirmed to fit the 2019 MDX.

Curt Manufacturing lists the #C22HR Class III hitch as a fit for all models of the 2022 Acura MDX. Installation will not require removing the bumper cover. If your spare tire is mounted to a wheel larger than 18 inches in diameter, the spare will no…

If your Xterra was not equipped with the factory tow package the port under the vehicle where the 4-pole trailer connector like part #C55441 plugs in will NOT be fully active. There is a jumper harness and relays that are needed to activate the tow…

The Torque Specification is found in the installation instructions on our product page on the etrailer #e98846 receiver hitch. A Torque Wrench #PT87ZR would be the type that you would need to achieve that rating.

The Tow Ready 2 Inch Hitch Ball, part #63845, you have referenced needs to be torqued to 250 foot pounds. It is recommended to frequently check that the ball is tightened to these specifications. If you are meaning the mounting bolts that are used to…