Distance Between Holes On Mounting Bracket Included With Hopkins Wiring Adapter # 37185

Question

Question:

I need to know the measurement between the screw holes on the mounting bracket where it attaches to the receiver hitch.

asked by: Lori P

0

Expert Reply:

I pulled one of the # 37185 wiring harness kits from our warehouse and measured the mounting bracket holes.

I have attached a photo of the bracket with the dimensions noted. The distance between the mounting holes is 2.25 inches. I have attached a link to a product review video you can check out.

expert reply by: Jeffrey L

0

click to enlarge

Answer 1

In order to control the brakes on your trailer, you will need a brake controller. Since you're going to be installing the Tekonsha #118289 on your 2015 Acura MDX, you don't already have the towing package in place, which would mean…

view full answer...

Answer 2

We do have a 7-way trailer wiring connector kit that fits your 2019 Acura MDX with the part #118289 which is custom fit.

view full answer...

Answer 3

Most likely you had some corrosion or dirt in the threads of the weldnuts of your 2015 Acura MDX which was causing the bolts to not be able to thread all the way in. This is a pretty common issue which affects the install of trailer hitch hardware.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like…

view full answer...

Distance Between Holes On Mounting Bracket Included With Hopkins Wiring Adapter # 37185

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching