Replacement Rear Header for Truxedo Lo Pro QT Tonneau of 2015 GMC Sierra 2500 Short Bed

Question

Question:

I need to replace the rear header on my Truxedo Lo Pro QT cover. My truck is a 2015 GMC Sierra 2500 HD. It has the six and half foot bed. What part do I need for this replacement?

asked by: William C

0

Expert Reply:

For the Truxedo Lo Pro QT cover part # TX572701 that you have on your 2015 GMC Sierra 2500 with a short bed part # TX572701 the correct replacement rear header is the part # TX5727-RearHeader.

expert reply by: Jameson C

0

Answer 1

For your 2015 Chevy Silverado 2500 short bed and TruXedo Lo Pro QT cover, #TX572001, you will need replacement rails #TX5720-SIDERAILS. The ones you referenced will not fit your truck/cover.

view full answer...

Answer 2

For your 2016 Chevrolet Silverado 1500, the correct replacement tarp is the Replacement Tarp for TruXedo Lo Pro Roll-up Tonneau Cover #TX572701-CVR for your TruXedo Lo Pro Soft Roll-up Tonneau Cover #TX572701.

view full answer...

Answer 3

The bed size for the tonneau covers typically happens at the main selection page when you click on the tonneau cover option for your 2015 Chevrolet Silverado 1500. If you got to the product page through a web search you would have skipped that screen…

view full answer...

Answer 4

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 7

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 8

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 9

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 10

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 11

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Replacement Rear Header for Truxedo Lo Pro QT Tonneau of 2015 GMC Sierra 2500 Short Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching