How Can I Find etrailer Installers Near Me?

Question

Question:

Who do you recommend in the Kansas City area to install your products?

asked by: Jerry F

1

Helpful Expert Reply:

We have an easy way to determine our recommended installers in your area. On each product page, there is text under the pictures and videos that states "Need help with installation? Find installers near me." Once you click on that link, you can input your area code to find a location convenient for you.

I went ahead and attached a photo that shows you where this link is located on each product page.

expert reply by: Bob C

1

How to Find Local Installers Near Me
(click to enlarge)

Answer 1

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Answer 2

Yes, you can use a load range C tire instead of a load range B tire as long as the new tire and rim are the same size and have the same bolt pattern as the old tire and rim. In this case, the potential new tire you reference, Kenda 4.80-12 Bias…

view full answer...

Answer 3

Yes, it does fit the Wilderness trim but I recommend using the etrailer Hitch item #e98912 instead. Both the Curt item #C13382 and the etrailer item #e98912 are confirmed to fit all models of the 2024 Subaru Crosstrek except for the hybrids. These…

view full answer...

Answer 4

For your 2022 Subaru Crosstrek, we offer two class III hitches. We have the Curt Trailer Hitch Receiver #C13382, and the etrailer Trailer Hitch Receiver #e98912. The Curt Trailer Hitch Receiver #C13382 & the etrailer #e98912 are class III…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver part #C13382 which is an excellent option for a 2019 Subaru Crosstrek weighs around 30 lbs.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

How Can I Find etrailer Installers Near Me?

Product Page this Question was Asked From

Continue Researching